Need help?Do you have a question about the Behringer U-Control UMX610 and is the answer not in the manual?
General| MIDI-keyboard number of keys | 61 keys |
|---|---|
| Product color | Red |
| Pitch bend wheel | Yes |
| Built-in speaker(s) | No |
| Interface | USB |
| Input voltage | 230 V |
| Input frequency | 50 Hz |
| Power source type | DC |
| Power consumption (typical) | 0.9 W |
Weight and Dimensions| Depth | 215 mm |
|---|---|
| Width | 990 mm |
| Height | 97 mm |
| Weight | 4690 g |
Details the validity and scope of the limited warranty for purchased products.
Instructions for registering purchased equipment for faster warranty service.
Procedure for obtaining warranty service through authorized channels.
Outlines conditions and circumstances not covered by the limited warranty.
Explains that the limited warranty is non-transferable to subsequent purchasers.
Limits liability for consequential or indirect damages under the warranty.
States the warranty is complete and supersedes other communications.
Addresses statutory consumer rights and potential conflicts with local laws.
Notes that warranty service conditions are subject to change.
Instructions for inspecting and handling the product upon delivery to ensure safe transport.
Guidance on proper ventilation, power connection options (USB, batteries), and polarity.
Instructions for registering purchased equipment for faster warranty service.
Specifies the necessary hardware and software for USB and stand-alone operation of the UMX.
Explains the basic concepts and applications of MIDI control with the UMX.
Describes the two operating modes: USB connection to a computer and stand-alone functionality.
Details the signal flow when the UMX is connected via USB to a computer.
Explains how the UMX operates without a computer connection.
Details the various controls, buttons, wheels, and their default functions.
Identifies and explains the purpose of the various input/output ports on the rear of the unit.
Description of the default operating mode for immediate use.
Provides tools for reconfiguring controller assignments for custom setups.
Sets the default MIDI channel for all outgoing messages.
Assigns specific control elements to individual MIDI channels.
Instructions for activating 'All Notes Off' or 'Reset All' MIDI commands.
Triggers transmission of all current parameter values and assignments.
Disables internal keyboard to MIDI/USB output transmission.
Detailed guide for assigning MIDI controllers to various hardware elements.
Methods for selecting programs and banks in external devices.
Explains assigning functions like transposition or program scrolling to octave buttons.
Adjusts how key velocity affects volume level.
Instructions for resetting the device to factory defaults.
Lists standard MIDI controller numbers and their assigned functions.
To Next Page
