Step 1: Hook-Up
(1) SD/MMC slot allows you to playback digital audio files stored on SD (Secure Digital) or MMC (MultiMedia Card) flash memory cards.
(2) LED DISPLAY shows the current file and playback settings.
(3) USB input allows you to playback audio files stored on a USB stick.
(4) INFRARED RECEIVER connects to the remote control.
(5) DIGITAL MEDIA PLAYER for USB and SD/MMC offers the following playback controls:
A. PLAY/PAUSE: Press to play, pause or search.
B. STOP PLAYBACK: Press to stop audio playback.
C. VOLUME UP: Press to increase the MP3 playback volume.
D. VOLUME DOWN: Press to decrease the MP3 playback volume.
E. BACK: Press once to move to the previous song or folder.
F. FORWARD: Press once to move to the nexsong or folder.
G. REPEAT: Press to select between One, Random, Folder or All repeat modes.
H. EQ: Press to activate the EQ function and choose between EQ presets: Normal (NOR), Pop (POP), Rock (ROC), Jazz (JAZ), Classical
(CLA) and Country (CUN).
I. MODE: Press to choose between the USB jack or SD/MMC/BLUETOOTH slot as the source for MP3 playback.
(6) MIC 1/2 jacks accept audio signals from devices using cables using XLR, balanced ¼” TRS or unbalanced ¼” TS connectors.
(7) MIC 1/2 knobs control the input level for the MIC 1/2 jacks.
(8) LINE/MP3 knob controls the volume level for the LINE IN signal and the MP3 signal.
(9) MASTER level control adjusts the final speaker volume.
(10) MP3/LINE switch toggles between the MP3 player or LINE IN audio sources.
(11) PWR LED lights up when the audio system is connected to power and switched on.
(12) CLIP LED lights up to indicate the internal limiter is responding to signal peaks.
(13) TREBLE knob adjusts the level of treble frequencies for the speaker unit.
(14) BASS knob adjusts the level of bass frequencies for the speaker unit.
(15) LINE OUT connections sends out an unbalanced stereo signal to external devices using audio cables with RCA connectors.
(16) LINE IN connections accepts unbalanced stereo signals from external devices using audio cables with RCA connectors.
(17) EXTENSION OUTPUT allows you to connect and drive an additional speaker cabinet (min. 8 Ω total load) using speaker cables with
professional twist-locking connectors.
(18) POWER switch turns the unit on and off.
Before turning on the audio system, all level controls must be set to a minimum. Once the system is turned on, slowly increase input
levels to help prevent damage to the speaker and amplifier.
(19) AC INPUT socket accepts the included IEC power cable.
Remote Control
(1) STOP button turns the Digital Media Player on and off.
To Next Page
Loading...
