Behringer Sonic Exciter SX3040 - Technical Specifications

10
SONIC EXCITER SX3040
4.2.2 Connection with insert cables
Use standard ¼" insert cables to connect the SONIC EXCITER
to the insert path of a mixing console. These Y cables have two
¼" TS connectors at one end, and one ¼" TRS connector at the
other. Connect the plug marked “Send” to the INPUT L jack on
the effects unit. Connect the “Return” plug to the OUTPUT L
jack on the device. Connect the TRS connector to the insert
jack of the channel strip on the mixing console. Use two insert
cables for stereo sub-groups and main-mix inserts. The second
cable must be connected to the INPUT/OUTPUT R jacks of the
SX3040.
Fig. 4.4: Insert cable with one ¼" TRS (tip-ring-sleeve) jack
plug on one end andtwo ¼" TS (tip-sleevel) jack plugs on the
other end
5. SPECIFICATIONS
5. SPECIFICATIONS
INPUTS
Connections XLR sockets and ¼" stereo jacks
Type Balanced
Input impedance 20 k
balanced, 10 k unbalanced
Nominal input level +4 dBu
Maximum input level +22 dBu
OUTPUTS
Connections XLR sockets and ¼" stereo jacks
Type Servo-balanced
Output impedance 60
balanced, 60 unbalanced
Maximum output level +22 dBu
BASS PROCESSOR
Type Frequency-selective compressor with
phase shifter
Filter cut-off frequency 50 Hz to 160 Hz
SONIC EXCITER
Type Harmonic exciter
Filter cut-off frequency 1.3 kHz to 10 kHz
SYSTEM DATA
Frequency response 10 Hz to 120 kHz, ± 3 dB
Signal-to-noise ratio >90 dB, unweighted, 20 Hz to 20 kHz
Distortion (THD + N) 0.005 % typ. @ +4 dBu, 1 kHz (IN)
Crosstalk >90 dB
POWER SUPPLY
Mains voltage
USA/Canada 120 V AC, 60 Hz
China/Korea 220 V AC, 50/60 Hz
Europe/UK/Australia 230 V AC, 50 Hz
Japan 100 V AC, 50-60 Hz
Export model 120/230 V AC, 50-60 Hz
Power consumption approx. 12 W
Fuse 100-120 V AC: T 250 mA, H 250 V
220-240 V AC: T 125 mA, H 250 V
DIMENSIONS/WEIGHT
Dimensions (H x W x D) approx. 44.5 x 482.6 x 217 mm
approx. 1 3/4" x 19" x 8 1/2"
Weight approx. 2.2 kg
approx. 4.9 lbs
BEHRINGER is constantly striving to maintain the highest professional standards.
As a result of these efforts, modifications may be made from time to time to existing
products without prior notice. Specifications and appearance may differ from those
listed or illustrated.
01_DATA-MANFULL_SX3040_582_EN_Rev_A.pmd 19.04.2007, 16:1010