Behringer UL 1000G2 - Product Specifications; Transmitter Specifications; Receiver Specifications

46
UL 1000G2
Specications
Transmitter
Receiver
Transmitter
RF Frequency range 584-608MHz / 823-832 MHz / 863 - 865 MHz
Maximum channel number 96 (depending upon the frequency band)
RF power output 10 mW
Spurious rejection >50 dBc
Switching bandwidth 24 MHz (depending upon the frequency band)
Peak deviation +/- 15 kHz
Audio Frequency range 70 Hz - 13.5 kHz (+/- 3 dB)
Signal to noise ratio >80 dB(A)
THD <1% to 1 kHz
Gain range -∞ to +6 dB
Connectivity
Power input DC input connector
Power switch Push button on/o
Audio inputs ¼"TRS / XLR x 2
Headphones ¼" stereo
Power Requirements
External power adaptor
(use only the supplied adapter)
12VDC 500 mA
Physical
Dimensions (W x H x D) 212 x 44 x 160 mm (8.3 x 1.7 x 6.3")
Weight 1.150 kg
Receiver
RF Frequency range 584-608MHz / 823-832 MHz / 863 - 865 MHz
Maximum channel number 96 (depending upon the frequency band)
Switching bandwidth 24 MHz (depending upon the frequency band)
Sensitivity <-92 dBm for 30 dB S/N ratio
Max PPM +/- 15 kHz
Audio Frequency range 70 Hz - 13.5 kHz (+/- 3 dB)
Signal to noise ratio >80 dB(A)
THD <1% to 1 kHz
Connectivity
Power switch Volume on/o
Earphones output 3.5 mm stereo
Power Requirements
Internal batteries 2 x 1.5 VDC (AA)
Operating time >6 hours/1300 mAH
Physical
Dimensions (W x H x D) 64 x 98 x 22 mm (2.5 x 3.85 x 0.86")
Weight 100 g (without batteries)