20
ULTRALINK UL2000M
5.3 Audio connections
The audio connections on the ULR2000 are laid out electronically balanced. Of course, you can
connect unbalanced equipment to the balanced connectors.
Fig. 5.2: XLR connections
Fig. 5.3: 1/4" TS connector
Fig. 5.4: 1/4" TRS connector
Unlike other microphones, the ULM2000 hand-held transmitter can not be connected using a cable. It connects
to the ULR2000 receiver wirelessly. Cables are only used to pass the signal from the receiver farther down
the signal path.
5. INSTALLATION
To Next Page
Loading...
