Behringer ULM202USB - ULM200 USB Controls; ULM200 USB Controls Description; ULM200 USB Getting Started; Product Specifications

4
ULM200USB Controls
Type of product : Wireless Microphone
ULM200USB Controls
1. POWER/STATUS LED
2.
VOLUME Button (Mute/volume down)
3.
VOLUME Button(Power on/unmute/volume up)
4. USB connector
5. Wireless Link Status LED
ULM200USB Getting Started
1. Press and hold the
button to power on the ULM200M wireless microphone.
2. Connect the ULM100D wireless dongle to the wireless only USB connector on the wireless
enabled device or to a USB port on a computer. The ULM200M will sync to the reveiver
automatically.
3. Use the
and buttons on the ULM200M wireless mic to adjust the volume.
4. Press and hold the
buttons to the mute the volume of the ULM200M.
5. Press the
button to un-mute the volume of the ULM200M.
6. Disconnect the ULM200D wireless dongle. The ULM200M wireless microphone will power
off when no wireless signal is detected for more than 1 minute. To ensure longer battery life,
unplug the ULM200D wireless dongle after use.
Specification
RF output +10dBm (10mW Max)