Need help?Do you have a question about the Behringer ULTRA-DI DI100 and is the answer not in the manual?
General| Type | Active DI Box |
|---|---|
| Output Connector | XLR |
| Power Supply | 9 V battery or phantom power |
| Input Impedance | 1 MΩ |
| Pad Switch | Yes |
| Ground Lift Switch | Yes |
| Maximum Input Level | +22 dBu |
| Construction | Metal |
| Frequency Response | 10 Hz |
| Dynamic Range | 110 dB |
| Attenuation | -20 dB |
Illustrates routing a guitar signal to the mixer input via the DI-box, bypassing the amplifier.
Explains converting unbalanced line sources like keyboards or DJ mixers to balanced signals for mixers.
Details converting unbalanced, high impedance microphone signals to balanced signals for console inputs.
Describes connecting amplifier outputs directly to the DI100 for signal tapping, even high-wattage ones.
To Next Page
