ULTRA TREMOLO UT300
Classic Tremolo Eects Pedal
Thank you for showing your condence in us by purchasing the BEHRINGER ULTRA TREMOLO UT300.
This high-quality eects pedal is designed to provide guitarists easy-to-use tremolo eect styles.
Thanks to its high-performance features you get the classic, warm and mind-bending tremolo eects
of vintage ‘60s amps.
The tremolo eect is achieved by periodic modulation of the input signal level. This results in a
continuous change from low to high level that has a quivering, tremulous sound character.
1. Controls
(1) The RATE control adjusts the speed of the tremolo eect.
(2) The DEPTH control adjusts the intensity of the eect.
(3) The WAVE control alters the LFO waveform that modulates the input signal from triangle to square.
This way you can achieve practically any tremolo sound, from classic to radical styles.
(4) The ON/BATT LED illuminates when the eect is activated. It also serves as a battery level indicator.
(5) Use the footswitch to activate/deactivate the eect.
(6) Use this ¼" TS IN connector to plug in the instrument cable.
(7) The ¼" TS OUT connector sends the signal to your amp.
Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery,
press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.
◊ The UT300 has no on/o switch. As soon as you insert the jack into the in connector,
the UT300 begins running. When not using the UT300, remove the jack from the in
connector. This extends the life of the battery.
The SERIAL NUMBER is located at the bottom.
(4)
(1)
(7)
(6)
(2)
(5)
(3)
To Next Page
Need help?
Inputs and Outputs
Power
Weight and Dimensions
