16. MAINS CONNECTION. Use the enclosed power cord to connect the unit to the mains. Please also note the
instructions given in the “Installation” chapter.
17. AUDIO IN. These are the audio inputs of your ULTRA GAIN PRO. The XLR connector is the common mic/line
input.
The line input is based on a jack connection.
18. AUDIO OUT. These are the audio outputs of your ULTRAGAIN PRO. Matching phone jack and XLR connectors
are wired in parallel.
Audio Input
Microphone
Connectors XLR
Type Transformerless, DGdecoupled input
Impedance 2.4 k0 balanced
Max input level +10 dBu balanced and unbalanced
Gain range +10 dB to +60dB
Mic EIN noise 127 dBu unweighted, 22 Hz to 22 kHz
CAIRN typ. >80dB M 1 kHz, +60 dB gain
Line
Connectors MB and %lack
Type Transformerless, DC-coupled input
Impedance 20 k0 balanced
Max input level +21 dBu balanced and unbalanced
CMFM typ. >50 da ie I kHz
Audio Outputs
To Next Page
Loading...
