Connectors =and %lack
Type Electronically servo-balanced output stage
Impedance 1000 balanced and unbalanced
Max output level +21 dBu balanced and unbalanced
Tube type 12AX7
Equalizer
Cut/boost range +/-15 dB
Frequency range 100 Hz to 2 kHz, range = x0.1, x1, x10
Bandwidth range 0.03 to 2 octaves
Low cut filter 12 Hz to 320 Hz, 12 dB per octave
System Specifications
Frequency response 10 Hz to 200 kHz, ±1 dB@ unity gain
Noise >95 du, unweighted, 22 Hz to 22 kHz
THD 0.04% typ. @ +4 dBu, I kHz, unity gain
Crosstalk <-88 dB @ 1 kHz
Indicators
Clip clipping control LED
Output level 12 segment LED display
Function switches LED indicator of every switch
Power Supply
Switch-mode auto range power supply 100-240 V —50/60 Hz
Power consumption 15 W
Mains connection Standard IEC connector
Physical
Dimensions (HWD) 44 x483 x 145 mm (1.7x 19.0 x 5.7)
Weight 1.7 kg (3.75 IN
Other important information
2. Register online. Please register your new Music Tribe equipment right after you purchase it by visiting
behringer.com. Registering your purchase using
our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms
and conditions of our warranty, if applicable.
3. Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the
Music Tribe Authorized Fulfiller for your country listed under “Support” at behringer.com.
Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which
may also be found under “Support” at behringer.com.
Alternatively, please submit an online warranty claim at behringer.com BEFORE returning the product.
4. Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct
mains voltage for your particular model.
To Next Page
Loading...
