21
ULTRALINK UL2000B
5.3 Audio connections
The audio connections on the ULR2000 are laid out electronically balanced. Of course, you can
connect unbalanced equipment to the balanced connectors.
Fig. 5.2: XLR connections
Fig. 5.3: 1/4" TS connector
Fig. 5.4: 1/4" TRS connector
The transmitter cannot be connected with a cable directly to a mixer, as is the case with wired
microphones. The connection between transmitter and the ULR2000 receiver is wireless. Then, the
receiver passes on the signal over a cable connection.
5. INSTALLATION
To Next Page
Loading...
