Behringer Vintager AC112 Technical Specifications

3
VINTAGER AC112
SPECIFICATIONS
AUDIO INPUTS
Connector 1/4" mono jack
Type RF filtered input
Guitar input
impedance approx. 1 MΩ unbalanced
Insert return
impedance approx. 10 kΩ unbalanced
Aux input
impedance approx. 10 kΩ unbalanced
AUDIO OUTPUTS
Connector 1/4" mono jack
Type line level output
Insert send
Impedance approx. 100 Ω unbalanced
Line out
Impedance approx. 120 Ω unbalanced
Max. output level +12dBu unbalanced
SYSTEM SPECIFICATIONS (power amplifier)
Power amp output 60 Watts RMS @ 5 % THD + N into 8 Ω; 230 V ~
MIDI INTERFACE
Type 5-pin-DIN-socket, MIDI IN
DIGITAL PROCESSING
Converters 24-bit sigma-delta, 64/128-times oversampling
Sampling rate 46.875 kHz
DISPLAY
Type 2-digit numeric LED-display
LOUDSPEAKER
Type 12" heavy duty loudspeaker, model JENSEN JCH12/70
Impedance 8 Ω
Power handling 70 Watts
POWER SUPPLY
Mains voltages USA/Canada 120 V ~, 60 Hz
U.K./Australia 240 V ~, 50 Hz
Europe 230 V ~, 50 Hz
general export model 100 - 120 V ~, 200 - 240 V ~, 50 - 60 Hz
Power consumption approx. 40 Watts min. / approx. 130 Watts max.
Fuse 100 - 120 V ~ : T 2 A H
200 - 240 V ~ : T 1 A H
Mains connection standard IEC receptacle
PHYSICAL
Dimensions (H * W * D) approx. 18.8" (477.5 mm) * 20.3" (515.2 mm) * 10.5" / 12.5" (266 mm /317.5 mm)
Weight approx. 18.5 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time
to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.

Behringer Vintager AC112 Specifications

General

Brand	Behringer
Model	Vintager AC112
Category	Amplifier
Language	English