Need help?Do you have a question about the Behringer V-Tone GMX210 and is the answer not in the manual?
General| Type | Guitar Amplifier |
|---|---|
| Technology | Solid State |
| Speaker Configuration | 2 x 10" Speakers |
| Amp Modeling | Yes |
| Channels | 2 Channels |
| Outputs | 1 x Line Out, 1 x Headphones Out |
| Controls | Gain, Volume, EQ |
| Footswitch | Optional |
| Weight | 10.4 kg |
| Inputs | 1 x 1/4" Instrument Input, CD Input |
Explains the core philosophy and component selection for the V-TONE amplifier.
Details the unique DYNAMIZER circuitry and analog modeling for authentic sound reproduction.
Guides on initial setup steps including shipment, operation, and warranty information.
Details all controls and connectors located on the front panel of the amplifier.
Describes the various connectors and controls found on the rear of the amplifier.
Explains how to wire the V-TONE for home recording with external effects units.
Describes a live setup using a MIDI foot controller and external loudspeaker.
Explains assigning specific effects to each channel for automatic switching.
Lists and describes the various built-in effects available on the V-TONE.
Details how to integrate the V-TONE into a MIDI setup for remote control.
Explains how to use the integrated chromatic tuner to tune your guitar.
Describes how to adjust the "a" reference tone for tuning purposes.
Details how to connect external loudspeakers to the V-TONE models.
Explains the process of connecting the V-TONE to other MIDI equipment.
Provides a chart detailing MIDI implementation for the V-TONE.
Lists all available effect presets, their variations, and parameters.
To Next Page
