13
VINTAGER GM110
4. AUDIO CONNECTIONS
4.2: Wiring of a stereo headphones plug
+ Please ensure that only qualified personnel install and operate the device.
+ Please make sure that all units have a proper ground connection. For your own safety, never
remove or disable the ground conductor of the unit or of the AC power cable. Instead, you can
eliminate hum problems caused by grounding (e.g. when connected to a mixing console) by
pressing the GND switch (groundlift, ).
4.1 Loudspeaker connection
The GM110 features a loudspeaker connection (mono jack socket) that allows you to hook up a supplementary
speaker. Optimum adaptation of the amp to the loudspeaker is ensured with an 8 W loudspeaker.
You can also connect speakers with lower impedances. However, this could trigger the power stage protective
circuitry on your VINTAGER GM110. With too high an impedance load, the maximum power output will drop in
proportion to the resistance connected.
+ Do not use an instrument cable to connect an external loudspeaker, rather use a special
loudspeaker cable. This will prevent any unnecessary losses of sound and output.
To Next Page
Loading...
