EasyManua.ls Logo

Behringer X AIR XR12 - Page 32

Behringer X AIR XR12
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
X AIR XR16/XR12
*App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc. Windows is either a registered trademark or
trademark of Microsoft Corporation in the United States and/or other countries.
(EN) Step 3: Network
Connection
Getting Started
First Wi remote connection to your
XAIR mixer
1. Download and install the remote
control app for your device.
Android smartphones/tablets:
X AIR Android from the Google
Play* store
iPad: X AIR for iPad from the
App Store
PC: X AIR EDIT for Windows*,
Macor Linux from
behringer.com
2. Set the REMOTE switch on your
XAIR mixer to ACCESS POINT mode
and power on the mixer.
3. Reset your X AIR mixers network
settings to default values by
holding the RESET button for
2seconds. Thisis located in the
small hole above the Wi icon and
requires a paper clip or similar tool
to reach.
4. Switch your remote control device
on and open the network settings.
Android smartphones/tablets:
1. Start the Settings/Wireless
& Networks dialog on your
Androidsystem.
2. Switch ‘Wi’ on.
3. Click on ‘Wi’ to select a network.
From the list of networks,
selectyour X AIR mixer’s name,
e.g. “XR16-19-1B-07”. After a few
seconds, thestatus should change
to‘Connected’.
4. Open your X AIR for Android
app and it will show similar
information:
Mix Access = All
IP Address = 192.168.1.1
Wi Lock = None
Wi connected to
XR16-19 -1B- 07
5. You may choose to lock the
connection to this specic Wi
network if you want to ensure that
your device cannot automatically
connect to another network while
you are controlling your mixer.
6. Click on ‘Connect’ and tap on the
mixer’s name in order to connect
the app with your mixer.
Note - if a warning pops up telling
you that the mixer rmware is not
supported, it is recommended to
update the rmware to the latest
version (see the XR16/XR12 pages
on behringer.com for details).
Youcan, however, choose to
connect anyway.
7. Once the app is connected to
your mixer, all parameters will
be loaded automatically. Enjoy
exploring all mixing functions of
your X AIR mixerremotely!
X AIR XR16/XR12 Network Connection

Related product manuals