Behringer X V-AMP Technical Specifications

3
X V-AMP
BEHRINGER continuously strives to assure the highest quality
standards possible. Required modifications may be implemented
without prior notice. Technical data and the appearance of the
unit may deviate from the above values and/or illustrations.
SPECIFICATIONS
INSTRUMENT INPUT
Type 1/4" TS connector, unbalanced
Input impedance approx. 1 MΩ
Max. input level +5 dBu
LINE/HEADPHONE OUTPUT
Type 1/4" TRS stereo connector, balanced
Output impedance approx. 50 Ω
Max. output level +13 dBu @ 10 kΩ / +18 dBm @ 100 Ω
MONO AMP OUTPUT
Type 1/4" TS connector, unbalanced
Output impedance approx. 100 Ω
Max. output level -7 dBu
DIGITAL SIGNAL PROCESSING
Converter 24-bit Delta-Sigma, 64/128-times
oversampling
Dynamics A/D 100 dB @ preamp bypass
Dynamics D/A 95 dB
Sample rate 31.250 kHz
DSP 100 Mips
Delay time max. 1960 ms stereo
Run time
(Line In >> Line Out) approx. 5 ms
DISPLAY
Type 2-digit, 7-segment LED display
POWER SUPPLY
Mains voltage USA/Canada 120 V~, 60 Hz
U.K./Australia 240 V~, 50 Hz
Europe 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
Power consumption max. 7 W
Mains connection external power supply (2-pole)
DIMENSIONS/WEIGHT
Dimensions (H x W x D) approx. 70 mm (2 3/4") x 235 mm (9 1/4")
x 175 mm (6 7/8")
Weight approx. 0.75 kg (1.65 lbs)
Shipping weight approx. 1.75 kg (3.85 lbs)

Behringer X V-AMP Specifications

General

Brand	Behringer
Model	X V-AMP
Category	Recording Equipment
Language	English