Need help?Do you have a question about the Behringer SUPER-X PRO and is the answer not in the manual?
General| Type | Crossover |
|---|---|
| Channels | 2-way stereo or 3-way mono |
| Frequency Range | 20 Hz to 20 kHz |
| Crossover Slopes | 12 dB/octave, 24 dB/octave |
| Inputs | XLR, 1/4" TRS |
| Outputs | XLR |
| THD | < 0.004% at 1 kHz |
| Output Impedance | 60 Ohms |
| Power Consumption | 15 W |
| Weight | 2.2 kg |
| Input Impedance | 20 kOhms |
Comprehensive instructions covering operation, water/moisture, ventilation, heat, power source, grounding, cord protection, cleaning, non-use, debris, and servicing requirements.
Details on active control elements for stereo 2-way operation, including INPUT, LOW CUT, LOW/HIGH XOVER FREQ, LOW OUTPUT, LOW PHASE INVERT, LOW MUTE, HIGH OUTPUT, HIGH PHASE INVERT, and HIGH MUTE.
Explanation of active control elements and connections on the rear panel for stereo 2-way operation, including XOVER FREQ, GAIN, PHASE INVERT, and MUTE switches.
To Next Page