Need help?Do you have a question about the Behringer SHARK DSP110 and is the answer not in the manual?
General| Type | Digital Signal Processor |
|---|---|
| Channels | 2 |
| Input Connectors | XLR, 1/4" TRS |
| Inputs | 2 |
| Output Connectors | XLR, 1/4" TRS |
| Outputs | 2 |
| Sampling Rate | 48 kHz |
| Frequency Response | 20 Hz - 20 kHz |
| Processing Delay | 1.5 ms |
| Power Supply | 9 V DC, 500 mA |
| Weight | 0.8 kg |
Explains the core features and capabilities of the SHARK DSP110 device.
Provides essential pre-operation checks and handling instructions for the unit.
Details the front panel controls and their functions for operating the device.
General guidelines and remarks on connecting the SHARK DSP110 for various uses.
Illustrates connecting the SHARK for microphone input to a mixing console.
Demonstrates connecting line-level audio sources to a mixing console via the SHARK.
Shows how to connect the SHARK between a console and power amp for speaker systems.
Explains the use of the SHARK in monitor paths for feedback protection and sound enhancement.
Details using the SHARK on individual channels or subgroups for feedback control.
Describes automatic system tuning using FILTER LEARN for feedback prevention.
Explains the automatic feedback detection and suppression mechanism of the SHARK.
Details the functionality and application of the integrated electronic delay line.
Explains the Noise Gate function for reducing unwanted background noise.
Describes the tunable high-pass (Low Cut) filter for removing low-frequency interference.
Explains the Compressor function for controlling signal dynamics and preventing distortion.
Details the servo-balanced audio input and output connections and their benefits.
To Next Page
