Behringer SHARK DSP110 - Line-Level Source to Mixing Console Connection

12
SHARK DSP110
Fig. 2.1: The SHARK connected between microphone and microphone input on
console
2.1.2 Connection between line-level source and mixing console
At first sight, this configuration may seem to make no sense, because line-level
sources usually have no problems with feedback frequencies. However, acoustic
instruments are often equipped with so-called piezo pickups which are susceptible
to feedback. In such a case, we recommend that you route the audio signal through
the SHARK before feeding it into the console.
Fig. 2.2: The SHARK connected between acoustic guitar and line input on console
2. APPLICATIONS
DATA-MANFULL_DSP110_ENG_Rev. E.p65 20.04.01, 15:4512