Need help?Do you have a question about the Beijer Electronics X2 pro 10-B2 and is the answer not in the manual?
General| Display Size | 10.1 inches |
|---|---|
| Resolution | 1280 x 800 pixels |
| Touch Technology | Projected Capacitive |
| RAM | 1 GB |
| Storage | 4 GB Flash |
| Ethernet | 2 x 10/100/1000 Mbps |
| Power Supply | 24 V DC |
| Protection Class | IP65 (front) |
| Processor | Cortex A9 |
| USB Ports | 1 x USB 2.0 |
| Operating Temperature | 0°C to +50°C |
General safety guidelines for installer and users.
Information on toxic and hazardous materials in components.
Guidelines for discarding electrical and electronic equipment.
Specific safety and installation requirements for UL/cUL certified panels.
Precautions and conditions for safe panel installation.
Guidelines for safe operation and interaction with the HMI panel.
Procedures and precautions for servicing and maintaining the HMI panel.
Recommended methods and agents for cleaning the touch screen display.
Guidance on recycling and hazardous components during disposal.
Explanation of cosmetic bubbles on the touch screen surface.
Explains how panel names are derived from family, size, generation, and variant.
Details required dimensions and clearances for panel installation.
Step-by-step guide for mounting and connecting the HMI panel.
Lists key parameters like dimensions, weight, CPU, ports, and memory.
Details operating temperature, humidity, vibration, approvals, and certifications.
Lists chemicals the metal casing's powder paint withstands.
Details solvent resistance for the protective film and touch screen surface.
Diagrams and descriptions of panel connectors and communication ports.
Technical drawings showing panel dimensions and mounting details.
Recommendations for proper grounding to prevent noise and ensure safety.
Guidance on shielded and unshielded Ethernet cabling for optimal performance.
Strategies for improving electromagnetic compatibility through cabling and grounding.
Factors affecting ambient temperature within the enclosure and cooling strategies.
Precautions for connecting 24 V DC power supplies, especially with mixed voltage systems.
Explains galvanic isolation for power and communication ports, and potential grounding issues.
Recommendations for shielded, twisted pair cables and bus termination for RS-485.
Guidelines for selecting cables and terminating CAN bus networks for optimal performance.
Information on supported file systems and size limitations for USB flash drives.
Explains image sticking phenomenon and methods to avoid or reduce it on TFT LCD panels.
To Next Page
