D-1
Membrane keyboard
Solvent resistance and environmental data for Autotex 2
Autotex 2 withstands exposure of more than 24 hours duration under DIN 42 115 Part 2 to
the following chemicals without visible change:
Ethanol Formaldehyde 37%-42% 1.1.1. Trichloroethane
(Genklene)
Cyclohexanol Acetaldehyde Ethylacetate
Diacetone alcohol Aliphatic hydrocarbons Diethyl ether
Glycol Toluene N-Butyl acetate
Isopropanol Xylene Amylacetate
Glycerine White spirit Butycellosolve
Methanol Fromic acid <50% Ether
Triacetin Acetic acid <50% Sodium hypchlorite
<20% (Bleach)
Dowanol DRM/PM Phosphoric acid <30% Hydrogen peroxide
<25%
Acetone Hydrochloric acid <36% Potassium carbonate
Metyl ethyl ketone Nitric acid <10% Washing powders
Dioxan Trichloracetic acid
<50%
Fabric conditioner
Cyclohexanone Sulphuric acid <10% Ferric chloride
MIBK Cutting oil Ferrous chloride
Isophorone Diesel oil Dibutyl Phthalate
Ammonia <40% Linseed oil Dioctyl Phthalate
Caustic soda <40% Paraffin oil Sodium carbonate
Potassium hydroxide
<30%
Blown castor oil
Alkalicarbonate Silicone oil
To Next Page
Loading...