Beijing StarFire Control Technology Co., Ltd. SF-2012AH-QG User Manual

Model SF-2012AH-QG
(V5.0-1.0)
CNC
Cutting Machine
User's Manual
Contents
Functional Overview
Main Menu
AUTO
MAN
EDIT
Command System
SETUP
LIBMINIT
DIAGNOSE
I/O Interface
Appendix
1. Pin definitions of height controller
2. SF-2012AH-QG Software
Upgrading Instructions
3. Installation Dimensional Diagrams
4. Troubleshooting
5.
Wiring Instructions of Extended
Manual Control Box

Beijing StarFire Control Technology Co., Ltd. SF-2012AH-QG Specifications

General

Brand	Beijing StarFire Control Technology Co., Ltd.
Model	SF-2012AH-QG
Category	Control Systems
Language	English

Summary

Chapter I. Functional Overview

1.1. System Functions

Details the capabilities and applications of the SF-2012AH-QG CNC System for various cutting machines.

1.2Technical specifications

Chapter III. Automatic Function(AUTO)

3.1. Description of Automatic Mode Window

Chapter IV. MAN(Manual Mode)

4.1. Description of Manual Mode Window

Explains the manual mode interface, directional controls, and specific operations.

Chapter V. EDIT Mode

5.1. Description of EDIT Menu

Covers the functions for creating, loading, saving, and deleting machining programs in the edit mode.

Chapter VI. Command System

6.1. Description of Programing Symbols

Defines function words and symbols used in CNC programming for cutting operations.

Chapter VII. SETUP(Parameter Setting)

7.1. Parameter Description

Provides an overview of different parameter categories: speed, system, and cutting parameters.

Chapter IV. Diagnose

9.1 Check Input/output Ports

10.3 Definitions of Input/Output Ports

10.5 Typical Wiring for Flame Cutting Operation(DB15)

10.6 Typical Wiring for Plasma Arc Cutting Operation

Appendix I: The Wiring Diagram and Pin Definitions for Model SF-HC30 Height Controller Manufactured by Microstep

1. Hybrid Wiring Diagram Compatible with Both Arc Voltage Type and Capacitance Type

Appendix II: Instructions for Software Upgrading Operation of SF-2012AH

Appendix IV: Troubleshooting

Appendix V: Wiring Instructions for Extended External Manual Control Box