Need help?Do you have a question about the Beka-Mak BMSY 440 and is the answer not in the manual?
Important information regarding the delivery and mounting of machine devices.
Machines manufactured in compliance with accident prevention rules.
Safety notes for installation, electrical connection, and operation.
Key safety instructions for machine operation and maintenance.
List of directives concerning machinery safety and compliance.
Relevant safety standards for machinery design and use.
Manufacturer's disclaimer for damages due to non-compliance with warnings.
Guidance for safe and correct electrical connection of the machine.
Detailed specifications including cutting capacity, motor power, and dimensions.
Instructions for safely lifting and transporting the machine.
Procedures for securely fixing the machine to the ground.
Method for balancing the machine using height adjustable screws.
Description of speed control potmeter and emergency stop button.
Explanation of start, stop, signal, and ready buttons.
Functions of bow up, bow down, coolant, and vice pressing buttons.
Adjusting blade tension and down feed speed for optimal cutting.
Regulating cutting pressure based on material grade and blade condition.
Detailed steps for performing the cutting operation.
Explanation of the role of various limit switches in machine operation.
Routine maintenance tasks to be performed daily and monthly.
Proper alignment and adjustment of blade guide arms.
Guidance on identifying and resolving common machine problems.
Table listing common defects, their causes, and repair procedures.
Procedures for pouring out, changing, and refilling hydraulic oil.
Instructions for filling coolant and setting a new blade.
Guidelines for selecting appropriate cutting speeds based on material.
Guidelines for cutting speeds and coolant based on material type.
Guidance on choosing the correct tooth style and pitch for band saw blades.
Explanation of tooth set types and their application.
Table correlating material types with cutting speeds and blade types.
Schematic diagram of the machine's hydraulic system.
To Next Page
General