BEKA Grizzly User Manual

Step 4)
Aach each beam at the level you choose for the project
size you want.
Depending on the posion of the lower beam:
- extra posioning blocks (included) may be needed as
spacers
- extra bolts (included) may be used to connect uprights
securely
Step 5)
Aach feet to boom of each set of uprights; secure
with washers and wing nuts..
ENJOY!!!
Use the loom standing upright on the oor or on a table
top.
-To remove a nished project, remove the bolts holding
one of the beams in place. Slide your nished weaving
o the beam teeth.
-For general “How-to-Weave” informaon go to our
Weaving Frame Instrucons online:
hp://www.bekainc.com/images/stories/wf14.pdf
Step 4
Step 5
Beka, Inc. • 542 Selby Ave • St. Paul, MN 55102 • USA
1-888-999-2352 • www.Bekainc.com
With one upright for table top use
With two uprights
Standing on the oor

BEKA Grizzly Specifications

General

Brand	BEKA
Model	Grizzly
Category	Power Tools
Language	English