Beko ASD241B - Default Chapter; Table of Contents

2 / 27 EN
Refrigerator / User Manual
1 Important instructions for safety and
environment 3
2 Your refrigerator 6
3 Installation 7
3.1. Appropriate installation location . . . . . . .7
3.2. Installing the plastic wedges. . . . . . . . . .7
3.3. Electrical connection . . . . . . . . . . . . . . .8
3.4. Adjusting the feet. . . . . . . . . . . . . . . . . .8
3.5. Illumination lamp . . . . . . . . . . . . . . . . . .8
3.6. Door open warning. . . . . . . . . . . . . . . . .9
3.7. Transportation of the product . . . . . . . . .9
4 Preparation 10
4.1. Things to be done for energy saving . . .10
4.2. Efficient operation . . . . . . . . . . . . . . . .10
4.3. Recommendations on the fridge
compartment. . . . . . . . . . . . . . . . . . . .10
4.4. Initial use. . . . . . . . . . . . . . . . . . . . . . .10
5 Operating the product 12
5.1. Indicator panel. . . . . . . . . . . . . . . . . . .12
5.2. Neo-Frost Cooling System . . . . . . . . . .15
5.3. Freezing fresh food . . . . . . . . . . . . . . .15
5.4. Recommendations for preserving the frozen
food . . . . . . . . . . . . . . . . . . . . . . . . . .16
5.5. Placing the food. . . . . . . . . . . . . . . . . .16
5.6. Deep-freeze information. . . . . . . . . . . .16
5.7. Icematic and ice storage container . . . .17
5.8. Ice making. . . . . . . . . . . . . . . . . . . . . .17
5.9. Chiller compartment. . . . . . . . . . . . . . .18
5.10. Butter & cheese section . . . . . . . . . . .18
5.11. Egg section . . . . . . . . . . . . . . . . . . . . .18
5.12. Crisper . . . . . . . . . . . . . . . . . . . . . . . .18
5.13. Odour filter . . . . . . . . . . . . . . . . . . . . .19
5.14. Drip tray . . . . . . . . . . . . . . . . . . . . . . .19
5.15. Water Dispenser . . . . . . . . . . . . . . . . .20
5.16. Using the water dispenser . . . . . . . . . .20
5.17. Filling the water dispenser's tank . . . . .20
5.18. Cleaning the water tank . . . . . . . . . . .21
6 Maintenance and cleaning 22
6.1 Avoiding bad odours. . . . . . . . . . . . . . .22
6.2 Protecting the plastic surfaces . . . . . . .22
7 Troubleshooting 23