This document is the user manual for a Beko Dishwasher, model BDIN16520. It provides comprehensive instructions for installation, operation, maintenance, and troubleshooting.
Function Description
The Beko Dishwasher is designed for domestic use, specifically for washing household dishes. It features a water softening system to reduce water hardness, ensuring optimal cleaning, rinsing, and drying performance. The appliance includes various baskets and racks for efficient loading of different dishware types, such as an upper basket, lower basket, silverware basket (model dependent), and upper/ceiling cutlery baskets (model dependent). Some models also feature a fan drying system for efficient drying and an Aquasafe+ system to protect against water leaks. The dishwasher offers multiple washing programs tailored to different soiling degrees and dish types, along with auxiliary functions to optimize time, water, and power consumption.
Important Technical Specifications
- Power Input: 220-240 V, 50 Hz (as per rating label)
- Total Power Consumption: 1800-2100 W (as per rating label)
- Heater Power Consumption: 1800 W (as per rating label)
- Total Current: 10 A (depends on model, as per rating label)
- Drain Pump Power Consumption: 30 W (as per rating label)
- Water Pressure: 0.3 - 10 bar (3 – 100 N/cm² = 0.03-1.0 Mpa)
- Permitted Water Temperature: Up to 25°C (60°C for Aquasafe+ equipped products)
- Loading Capacity: 15 place settings (for Eco 50°C program)
- Compliance: EU WEEE Directive (2012/19/EU) and RoHS Directive (2011/65/EU), IEC 60436/DIN 44990, EN 50242.
Usage Features
- On/Off Key: Powers the machine on and off, defaulting to the Eco program when turned on.
- Programme Selection / Programme Cancel Key: Allows selection of desired washing programs and cancellation of a running program by holding for 3 seconds.
- Function Keys: Activates auxiliary functions (Hygiene Intense, Fast+) if supported by the selected program. Indicators flash when active.
- Delayed Start Key: Delays the start of a program up to 9 hours in 3-hour increments.
- Salt Indicator (S): Illuminates when the salt reservoir needs refilling.
- Rinse Aid Indicator (*): Illuminates when the rinse aid reservoir needs refilling.
- Water Cut-off Warning: Flashes if mains water supply is interrupted.
- Water Overflow Warning (P1 Flashes): Flashes if the machine intakes too much water or has a leak.
- Water Softening System Adjustment: Allows users to adjust the water hardness level (0-5) based on supply water hardness, using a test strip and control panel settings.
- Detergent Dispenser: Accommodates powder, liquid/gel, or tablet detergents. Includes level markings for powder detergent (15 cm³ or 25 cm³).
- Rinse Aid Reservoir: Fillable up to "MAX" level, with adjustable dispensing levels (0-4 doses).
- Dish Loading: Instructions for optimal placement of dishes in upper and lower baskets, including collapsible tines, bottle wires, height-adjustable racks, and cutlery baskets to maximize space and cleaning efficiency. Sharp items should be placed pointed downwards.
- Inner Illumination (model dependent): Interior lighting when the door is opened, with adjustable settings (on/off).
- Floor Illumination (model dependent): Projects a light onto the floor during washing, turning off when the program finishes.
- Warning Sound Volume Adjustment: Allows users to adjust the volume of warning sounds (off, medium, high).
- Hygiene Intense Function (model dependent): Increases washing and rinsing temperatures and extends cycle times for enhanced hygiene, including an additional rinsing cycle.
- Fast+ Function: Shortens washing cycle time and reduces water consumption by increasing water pressure.
Maintenance Features
- General Cleaning: Unplug the product and turn off the tap before cleaning. Do not use abrasive substances.
- Outer Surface Cleaning: Wipe gently with a mild cleaning material and damp cloth. Control panel should be wiped with a slightly damp cloth.
- Interior Cleaning: Run a program with or without detergent. If water remains, drain it by cancelling a program or removing and cleaning filters.
- Filter Cleaning: Clean filters at least once a week. Remove micro filter, coarse filter, and metal/plastic filter, then clean under running water with a brush. Ensure proper reassembly.
- Hose Filter Cleaning (model dependent): Regularly check and clean the filter attached to the water inlet hose to prevent damage from impurities. Turn off the tap, remove the hose, clean the filter, and reinstall.
- Impeller Cleaning: Clean impellers at least once a week. Check for clogged holes. Lower impeller can be pulled up; upper impeller requires turning its nut to the left for removal. Ensure nuts are tightened well upon reinstallation.
- Troubleshooting Guide: Provides solutions for common issues such as the machine not starting, dishes not being clean or dry, unpleasant odors, rust/discoloration, detergent residue, scratched dishes, and foam formation. It advises consulting an authorized service agent if problems persist.
Need help?
General
To Next Page
