EN / 26
programme for which duration of rinse
hold, washing action, washing and rinsing
duration are modified.
Below you can find the soil groups that
can be selected with the “Quick Wash”
setting button:
When “Quick Wash” is not selected;
Sweat, collar dirt, food, mayonnaise, salad
dressing, make-up, machine oil, baby food.
When the “Quick Wash” button is
pressed once;
Blood, chocolate, pudding, grass, mud,
eggs, butter, curry.
When the “Quick Wash” button is
pressed twice;
Tea, coffee, juice, ketchup, red wine, cola,
jam, coal
1. Select the stain programme.
2. Select the stain you want to clean by
locating it in the groups above and se-
lecting the related group with the quick
auxiliary function button.
3. Read the garment tag carefully and en-
sure that correct temperature and spin
speed are selected.
6.6 Temperature Selection
Whenever a new programme is selected,
after a certain period of time the recom-
mended temperature info for the pro-
gramme appears on the duration indicator.
It is possible that the recommended tem-
perature value is not the maximum temper-
ature that can be selected for the current
programme.
Press the Temperature Adjustment button
to change the temperature. Temperature
decreases gradually.
Press the Temperature Adjustment button
to see the currently selected temperature
value.
No change can be made in pro-
grammes where temperature ad-
justment is not allowed.
You can also change the temperature after
the washing starts. This change can be
made if the only washing steps allow it.
6.7 Spin Speed Selection
Whenever a new programme is selected,
the recommended spin speed of the selec-
ted programme is displayed on the Spin
Speed indicator. It is possible that the re-
commended spin speed value is not the
maximum spin speed that can be selected
for the current programme.
Press the Spin Speed Adjustment button to
change the spin speed. Spin speed de-
creases gradually.
Then, depending on the model of the
product, "Rinse Hold " and "No Spin
" options appear on the display.
If you are not going to unload your laundry
immediately after the programme com-
pletes, you can use Rinse Hold function in
order to prevent your laundry from getting
wrinkled when there is no water in the ma-
chine.
This function holds the laundry in the final
rinsing water. If you want to spin your laun-
dry after the Rinse Hold function:
1. Adjust the Spin Speed.
2. Press Start/Pause button. The pro-
gramme will resume. Machine drains
the water and spins the laundry.
If you want to drain the water at the end of
the programme without spinning, use No
Spin function.
No change can be made in pro-
grammes where spin speed adjust-
ment is not allowed.
To Next Page