Need help?Do you have a question about the Beko BNFI 090 and is the answer not in the manual?
General| Power Supply | 220-240V, 50Hz |
|---|---|
| Net Weight (Indoor Unit) | 8 kg |
| Type | Split |
| Cooling Capacity | 9000 BTU |
| Operating Temperature (Cooling) | 18°C to 43°C |
Details concerning fluorinated gasses, installation, service, and recycling.
Visual sequence of steps for installing the air conditioner system.
Schematic showing recommended unit positioning and space requirements.
Specific safety warnings related to wall mounting and pipe runs.
Detailed steps and requirements for selecting the installation location.
Guidelines for arranging multiple outdoor units in a series configuration.
Instructions for fitting the drain joint to manage condensate water.
Important considerations for drilling wall penetrations for refrigerant lines.
Guidance on connecting a 24K indoor unit and its specific requirements.
Critical safety warnings for handling and connecting refrigerant pipes.
Steps for cutting, flaring, and connecting pipes to ensure a leak-free system.
Essential warnings regarding electrical safety, grounding, and connections.
Procedure for preparing and connecting the power and signal cables to the outdoor unit.
Diagrams illustrating wiring configurations for various system models.
Safety warnings related to vacuum pump usage and refrigerant handling during evacuation.
Step-by-step guide on how to perform system evacuation using a vacuum pump.
Methods for performing electrical safety checks and detecting refrigerant leaks.
Pre-test checklist to ensure all installation steps are completed correctly.
Instructions for operating the unit and verifying its performance.
Details on how the system automatically detects and corrects wiring/piping issues.
Steps to follow to enable and utilize the automatic correction feature.
Information on compliance with F-Gas regulations for refrigerants.
To Next Page
