Why does my Beko Water Dispenser compressor turn on and off frequently?
If your Beko Water Dispenser's compressor is frequently turning on and off, it might be due to a hot room temperature. Try to reduce the room temperature. Also, ensure that the water dispenser has enough backside space.
Why is the hot water from my Beko Water Dispenser not hot enough?
If the hot water from your Beko Water Dispenser isn't hot enough, check to be sure the hot switch on the back of the unit is turned on.
Why is my Beko Water Dispenser so noisy?
If your Beko Water Dispenser is making too much noise, it could be due to several reasons. As each cycle ends, a gurgling sound caused by the flow of refrigerant is normal. Also, the contraction and expansion of the inside walls may cause popping and cracking noises. If the dispenser is not placed level, adjust it to be level.
Why is my Beko Water Dispenser not cold enough?
If your Beko Water Dispenser is not cold enough, check that the cold switch on the back is turned on and ensure the water dispenser has enough backside space.
What to do if my Beko BSS-2201 TT Water Dispenser does not operate?
If your Beko Water Dispenser does not operate, the first thing you should check is whether it's properly plugged in. If it is not, plug in the water dispenser.
How to stop my Beko BSS-2201 TT from vibrating?
To address vibration issues with your Beko Water Dispenser, ensure that it is placed in a balanced manner.
Explains the meaning of symbols used throughout the manual for important information and warnings.
Provides essential safety instructions for operating the water dispenser safely and avoiding hazards.
Information on compliance with WEEE Regulation and proper disposal of electrical and electronic equipment.
Details about the product's packaging materials, emphasizing their recyclability and proper disposal.
Provides recommendations on how to use the water dispenser efficiently and save energy.
Illustrates and lists the main controls and parts of the water dispenser for user identification.
Details key technical specifications such as capacities, power, and dimensions of the water dispenser.
Guides users through the initial setup, cleaning, and preparation steps before first use.
Provides instructions on how to properly place and install the water dispenser in a suitable location.
Details the step-by-step process for operating the heating and cooling functions of the dispenser.
Provides instructions for regular cleaning and maintenance of the water dispenser to ensure optimal performance.
Instructions for securely mounting the water dispenser using provided brackets and hardware.
Offers solutions to common problems encountered with the water dispenser, covering operation and noise.
General| Type | Table Top |
|---|---|
| Number of Taps | 2 |
| Water Supply | Bottled |
| Voltage | 220-240V |
| Cold Water Temperature | ≤10°C |
| Power Consumption | 500W |
| Frequency | 50 Hz |
To Next Page
