How to fix a Beko CEG 5331 X that does not work?
If your Beko Coffee Maker isn't working, make sure it's properly plugged into the mains and the switch is turned on. Also, check the cable and the plug for any issues.
What to do if descaling indicator keeps flashing on Beko CEG 5331 X?
If the descaling indicator keeps flashing on your Beko Coffee Maker even after descaling, the process may not be complete. Be patient and wait for the process to finish; the machine will shut off automatically. Don’t switch off the machine manually.
Why is the coffee from my Beko CEG 5331 X Coffee Maker not hot enough?
If the coffee from your Beko Coffee Maker isn't hot enough, it could be because the cups haven't been preheated or the brewing unit is too cold. To resolve this, rinse the appliance at least three times before making coffee.
Why does my Beko CEG 5331 X Coffee Maker take so long to warm up?
If your Beko Coffee Maker is taking too long to warm up, it's likely due to excessive scale buildup. Descale the appliance to resolve this issue.
What to do if Beko Coffee Maker delivers coffee too slowly?
If coffee is dispensing too slowly or just a drop at a time from your Beko Coffee Maker, the coffee powder may be too fine, blocking the water flow. Adjust the coffee fineness to a bigger dot during grinder operation.
Why is the internal drip tray of my Beko CEG 5331 X Coffee Maker filled with water?
If the internal drip tray of your Beko Coffee Maker is filled with a lot of water, it may be because the coffee powder is too fine, which blocks the water from coming out. Adjust the coffee fineness to a bigger dot during grinder operation.
How to fix Beko CEG 5331 X when no milk foam comes out?
If no milk foam comes out from your Beko Coffee Maker, it could be due to a dirty or incorrectly assembled automatic milk frother. Clean the automatic milk frother and ensure it is correctly assembled or installed.
Why are the touch buttons on my Beko Coffee Maker not sensitive?
If the touch buttons on your Beko Coffee Maker aren't sensitive, ensure you are pressing the lower bottom part of the icon of the touch button from the front direction of the appliance.
What to do if Beko CEG 5331 X panel is not responding?
If you experience no or delayed response when pressing a function key on your Beko Coffee Maker, it might be due to electromagnetic interference or dirt on the panel. Try unplugging the appliance and restarting it after a few minutes. Also, clean the panel with the provided cloth.
Why is the milk froth from my Beko Coffee Maker poor quality?
If the milk froth from your Beko Coffee Maker is of poor quality, the type of milk used may not be suitable for frothing. Semi-skimmed or full-fat cow’s milk generally gives good results.
General| Appliance placement | Countertop |
|---|---|
| Product type | Espresso machine |
| Coffee input type | Ground coffee |
| Built-in grinder | No |
| Milk tank | No |
| Hot water system | Yes |
| Number of spouts | 2 |
| Housing material | Stainless steel |
| Removable water tank | Yes |
| Removable drip tray | Yes |
| Power | 900 watts |
| Depth | 34 cm |
| Anti-Drip System | Yes |
| Keep Warm Function | Yes |
| Auto Shut-Off | Yes |
| Filter Type | Permanent filter |
| Dimensions | 24 x 34 x 30 cm |
| Control type | Buttons |
| Height | 30 cm |
| Capacity | 1.5 liters |
| Water tank capacity | 1.5 liters |
| Material | Stainless steel |
Covers dangers of electric current and necessary precautions to avoid shocks.
Highlights risks from hot machine parts, dispensed drinks, and steam.
Essential precautions for safe handling and operation of the appliance.
Defines the appliance's intended use and the dangers associated with misuse.
Manufacturer's disclaimer for damages resulting from misuse or unauthorized modifications.
Covers compliance with WEEE/RoHS directives and proper product disposal procedures.
Details on recyclable packaging materials and their recommended disposal methods.
Explains indicator lights and their meanings for various functions and error states.
Details the functions of key buttons like Hot Water, Espresso, Cappuccino, and Latte Macchiato.
Guide on removing protective films and stickers before appliance setup.
Instructions for filling the water tank and understanding low water level warnings.
How to memorize desired volumes for espresso, coffee, and hot water.
Instructions for using and cleaning the automatic milk froth system.
Dispensing hot water and selecting between ECO, Speed, and Default modes.
Explanation of the pre-brewing process for enhanced coffee extraction.
General cleaning, emptying grounds container, and checking brewer/door status.
Procedure for initiating the self-cleaning cycle with cleaning agent.
Using empty system function for storage and frost protection.
Performing a manual rinsing cycle to clean the coffee nozzle after use.
How to set and store desired volumes for various beverages.
Steps to cancel the automatic cleaning mode.
Addresses common problems like appliance not working, coffee temperature, flow issues, and provides solutions.
Troubleshooting slow coffee, no milk foam, poor froth quality, and bean indicator issues.
Resolving milk spray, persistent descaling indicator, and rinsing cycle problems.
To Next Page
