How to fix a Beko DIN15Q10 Dishwasher that won't start?
If your Beko Dishwasher isn't starting, several factors could be at play. First, ensure the power cable is securely plugged in. Then, check the fuses in your house. Also, verify that the water inlet tap is open and that the dishwasher door is fully closed. Finally, confirm that you've pressed the On/Off button to power on the machine.
Why are my dishes not getting clean in my Beko Dishwasher?
If dishes aren't clean after a Beko Dishwasher cycle, several issues might be the cause. Ensure dishes are loaded according to the manual, and select a program with a higher temperature and longer cycle if needed. Check that impellers rotate freely and aren't blocked by food remnants; clean them regularly. Also, inspect and clean the filter system, ensuring it's correctly installed. Avoid overloading the baskets. Store powder detergent in a closed container in a dry place, or switch to tablet detergents. Use enough detergent and rinse aid, and confirm the detergent dispenser lid is tightly closed.
What to do if rinse aid is not sufficient in Beko Dishwasher?
To address insufficient rinse aid in your Beko Dishwasher, check the rinse aid indicator and add rinse aid if necessary. If there is enough rinse aid, consider increasing the rinse aid setting.
General| Size | Full-size |
|---|---|
| Energy Efficiency Class | A+ |
| Number of Programmes | 5 |
| Noise Level | 49 dB |
| Colour | White |
| Control Type | Electronic |
| Delay Start | Yes |
| Half Load | Yes |
Provides essential safety guidelines for operating the dishwasher and defines its intended domestic use.
Highlights the dangers of electrical appliances for children and precautions to keep them safe.
Details safe practices for disposing of packaging materials and transporting the appliance.
Covers compliance with WEEE and RoHS directives, and information on recyclable packaging materials.
Identifies the main parts and components of the dishwasher with a labelled diagram.
Lists key technical data, power input, consumption, and water pressure requirements.
Guides on selecting an appropriate location and connecting the water supply correctly.
Details on connecting the drain hose, adjusting feet, and electrical connection requirements.
Covers earthing requirements, fitting alternative plugs, and initial steps before first use.
Provides advice for using the dishwasher in an ecological and energy-efficient manner.
Explains the function of the water softening system and its importance for washing quality.
Guides on how to adjust the water hardness level for optimal washing performance.
Details the process of filling the salt reservoir for the water softening system.
Information on using powder, liquid, or gel detergents and recommended amounts.
Explains the role of rinse aid for drying efficiency and how to refill the reservoir.
Provides instructions on how to load dishes for optimal cleaning and drying.
Details on collapsible tines, cutlery baskets, and upper basket adjustments for flexible loading.
Identifies the keys and indicators on the dishwasher's control panel.
Guides on selecting programmes, preparing the machine, and starting/cancelling cycles.
Presents a table detailing various wash programmes, temperatures, and consumption values.
Explains the meaning of salt, rinse aid, end of programme, water cut-off, and overflowing warnings.
Covers adjustments for warning sound volume, interior lighting, and programming the washing time.
Instructions for cleaning the outer surfaces, door gaskets, control panel, and interior of the machine.
Details on how to remove and clean the micro and coarse filters for efficient operation.
Guidance on cleaning the filter attached to the water inlet hose to prevent damage.
Instructions for cleaning the lower and upper impellers to ensure proper washing performance.
Addresses problems like the machine not starting or dishes not being washed clean.
Solutions for dishes not drying properly and issues related to improper unloading or loading.
Covers problems like deteriorated utensil surfaces, stains, traces, rust, and scratches.
Addresses problems such as odour, detergent dispenser issues, foam, broken utensils, and water retention.
Outlines the standard manufacturer guarantee terms, coverage, and exclusions.
Specifies the types of repairs covered under the guarantee and those that are excluded.
Provides guidance on how to get service, contact details, and information regarding repair charges.
To Next Page
