Beko DPU 7440 User Manual (English)

Questions and Answers:

D
Deborah MasonAug 12, 2025
Why does my Beko DPU 7440 take so long to dry?
- C
  Cody JonesAug 12, 2025
  If your Beko Dryer takes too long to dry, several factors could be the cause. Here's what to check: * The lint filter may be clogged. Try washing it with warm water. * The filter drawer might be clogged. Clean the sponge and filter cloth in the filter drawer. * The ventilation grids on the front of the machine could be blocked. Remove any obstructions. * The room may be too small, causing insufficient ventilation. Open a door or window to lower the room temperature. * There may be lime deposit on the dampness sensor. Try cleaning the dampness sensor. * The dryer may be overloaded. Avoid loading the dryer excessively. * The laundry might not be spun enough. Spin your laundry at a higher speed in your washing machine.
K
kellymichelleAug 16, 2025
What to do if laundry comes out wet from Beko DPU 7440?
- M
  mckeepeterAug 16, 2025
  If your laundry is still wet after a drying cycle in your Beko Dryer, it could be due to several reasons: * The selected program may not be suitable for the laundry type. Check the care labels on your clothes and select an appropriate program, or use timer programs. * The lint filter may be clogged. Wash it with warm water. * The filter drawer may be clogged. Clean the sponge and the filter cloth in the filter drawer. * The dryer may be overloaded. Avoid loading the dryer excessively. * The laundry may not have been spun sufficiently. Spin your laundry at a higher speed in your washing machine.
E
Eric WoodAug 20, 2025
How to fix a Beko DPU 7440 Dryer that won't turn on?
- A
  Abigail HaynesAug 20, 2025
  If your Beko Dryer isn't turning on or the program won't start, try these steps: 1. Ensure the dryer is properly plugged in. 2. Check that the loading door is fully closed. 3. Make sure a program is selected and that the dryer isn't in 'Pause' mode. 4. Verify that the Childproof Lock is deactivated.
G
gilbertcherylAug 23, 2025
Why is water leaking from the loading door of my Beko DPU 7440 Dryer?
- J
  Jeffrey AyersAug 23, 2025
  If water is leaking from the loading door of your Beko Dryer, it's likely due to lint buildup. Clean the inner surfaces of the loading door and the surfaces of the loading door gasket to resolve this.
M
Michael WilcoxAug 27, 2025
Why does laundry shrink in Beko DPU 7440 Dryer?
- J
  Jeanne PadillaAug 27, 2025
  Laundry shrinkage, felting, or deterioration in your Beko Dryer can occur if the selected program isn't right for the fabric type. Always check the garment tag and choose a program designed for that specific fabric.
R
Robert MurrayAug 30, 2025
Why does the loading door on my Beko DPU 7440 open spontaneously?
- R
  Rebecca MillerAug 31, 2025
  If the loading door of your Beko Dryer opens on its own, make sure to push the loading door closed until you hear it lock.
L
Laurie JohnstonSep 3, 2025
What does Water Tank warning symbol mean on Beko DPU 7440?
- A
  Anthony AguilarSep 3, 2025
  If the Water Tank warning symbol is on or flashing on your Beko Dryer, it means either the water tank is full (so you should drain it), or if the product is connected directly to a wastewater drain, the water drain hose is bent, so check the water drain hose.
E
Eric MorenoSep 7, 2025
Why does my Beko DPU 7440 Dryer programme get interrupted?
- T
  Taylor AdamsSep 7, 2025
  If your Beko Dryer program stops unexpectedly, it might be due to: * The loading door being ajar. Ensure it is securely closed. * A power failure. Press the Start / Pause / Cancel button to restart the program. * The water tank being full. Drain the water tank.

Beko DPU 7440 Specifications

General

Type	Heat Pump Dryer
Appliance placement	Freestanding
Rated capacity	7 kg
Energy Efficiency Class	A++
Noise Level	65 dB
Width	60 cm
Height	85 cm
Number of Programs	15
Heat Pump Technology	Yes
Reverse Action	Yes
Child Lock	Yes
Display Type	LED
Drying class	B
Loading type	Front-load
Drying programs	Mix, Wool