Why is my Beko FN 131420 not operating?
If your Beko Refrigerator isn't operating, make sure the plug is securely inserted into the socket. Also, check the fuse of the socket your refrigerator is connected to, as well as the main fuse, to see if they have blown.
Why is the temperature in my Beko Refrigerator too high?
Several factors can cause a high temperature in your Beko Refrigerator. The fridge temperature might be set too high, which affects the freezer's temperature, so adjust the settings and wait. Also, frequent door openings or doors left ajar can raise the temperature; avoid opening the doors frequently and ensure they are fully closed. If you've recently plugged in the refrigerator or loaded it with food, it's normal for it to take some time to reach the set temperature.
How to fix vibrations or noise coming from my Beko FN 131420?
If your Beko Refrigerator is vibrating or making noise, it might be due to an uneven or unstable floor. Adjust the refrigerator's feet to balance it if it rocks. Ensure the floor is strong enough to support the refrigerator and that it is level.
What to do if food kept in the fridge compartment drawers of my Beko FN 131420 is frozen?
If food in the fridge compartment drawers of your Beko Refrigerator is freezing, the fridge temperature might be set too high. Try adjusting the fridge temperature to a lower value and check again.
What to do if my Beko FN 131420 is adjusted to a very low temperature?
Adjust the Beko Refrigerator temperature to a warmer degree and wait until the temperature is achieved.
What to do if there is a bad odor inside my Beko Refrigerator?
A bad odor in your Beko Refrigerator can be caused by several factors. Regularly clean the inside with a sponge, lukewarm water, or water with carbonate. Certain containers or packaging might be the source of the smell, so try using different ones. Also, ensure food is stored in closed containers and remove any expired or spoiled items.
What to do if my Beko FN 131420 Refrigerator is not closing?
If the door of your Beko Refrigerator isn't closing, check for food packages blocking it and reposition them. Also, ensure the refrigerator is level on the floor by adjusting the feet. Verify that the floor is level and strong enough to support the refrigerator.
What to do if there is condensation on the side wall of my Beko FN 131420?
Condensation on the side wall of your Beko Refrigerator can occur due to several reasons. Avoid installing the refrigerator in places where the temperature falls below 10 °C, as a very cold ambient temperature can cause this. Do not open the door too frequently. A very humid environment can also cause condensation, so avoid installing it in highly humid places. Ensure food containing liquid is stored in closed containers, and that the refrigerator door is properly closed. Adjust the thermostat to a suitable level, as a very cold setting can also contribute to condensation.
What to do if my Beko FN 131420 Refrigerator is not plugged into the socket?
Make sure that the plug of your Beko Refrigerator is fit into the socket.
General| Appliance placement | Freestanding |
|---|---|
| Product colour | White |
| Noise level | 42 dB |
| Door hinge | Right |
| Annual energy consumption | 250 kWh |
| Model | FN 131420 |
| Number of Doors | 1 |
| Freezer Compartment | Yes |
| Climate class | SN-T |
| Total Net Capacity | 277 L |
| Total Capacity | 277 L |
To Next Page
