How to troubleshoot a Beko TSE 1423 that does not operate?
If your Beko Refrigerator isn't working, first ensure it's properly plugged into the socket. If it is, check the fuse of the socket or the main fuse, as it may have blown out.
Why is there condensation on the side wall of my Beko TSE 1423 Refrigerator?
If you notice condensation on the side wall of your Beko Refrigerator's fridge compartment, it might be due to several reasons. Ensure the refrigerator isn't placed in a location where the temperature drops below 10 °C or in a very humid environment. Avoid opening the door frequently and ensure it's properly closed. Also, don't store food with liquid content in open containers, and make sure the thermostat is set to an appropriate level.
What causes high temperature in my Beko TSE 1423 Refrigerator or freezer?
If the temperature in your Beko Refrigerator or freezer is too high, adjust the fridge temperature to a lower value, as the fridge compartment temperature setting affects the freezer's temperature. Avoid opening the doors frequently or leaving them ajar. If you've recently plugged in the cooler/freezer or loaded it with food, it may take some time to reach the set temperature. Also, do not put hot food into the cooler/freezer.
Why is there condensation on the inner walls of my Beko Refrigerator?
Condensation on the inner walls of your Beko Refrigerator is often normal, especially in hot and humid weather. However, make sure you're not opening the doors too frequently or leaving them ajar, as this can worsen the issue. Ensure the door is completely closed.
What to do if the door of my Beko TSE 1423 Refrigerator is not closing?
If the door of your Beko Refrigerator isn't closing properly, first check if any food packages are blocking it. Then, ensure the refrigerator is level on the floor by adjusting the feet. Also, make sure the floor itself is level and strong enough to support the refrigerator.
Why is the fridge temperature too low in my Beko TSE 1423 Refrigerator?
If the fridge temperature in your Beko Refrigerator is too low while the freezer temperature is fine, simply adjust the fridge temperature to a warmer setting and check again.
What to do if the freezer temperature is very low in my Beko TSE 1423?
If the freezer temperature in your Beko Refrigerator is too low while the fridge temperature is okay, try adjusting the freezer temperature to a warmer setting and see if that helps.
How to stop vibrations or noise coming from my Beko TSE 1423 Refrigerator?
If your Beko Refrigerator is vibrating or making noise, ensure the floor is level and stable; adjust the feet to balance the unit. Also, check if items on top of the cooler/freezer are causing the noise and remove them.
Why is food freezing in the fridge drawers of my Beko Refrigerator?
If food in the fridge compartment drawers of your Beko Refrigerator is freezing, it might be because the fridge temperature is set too high. Try adjusting it to a lower value.
Why is my Beko TSE 1423 making liquid flowing noises?
If you hear noises like liquid flowing or spraying from your Beko Refrigerator, it's normal and not a fault. These noises are due to the liquid and gas flows within the cooler/freezer's operating system.
General| Model | TSE 1423 |
|---|---|
| Brand | Beko |
| Energy Efficiency Class | A+ |
| Dimensions (H x W x D) | 84 x 54 x 60 cm |
| Color | White |
| Number of Shelves | 3 |
| Number of Door Bins | 3 |
| Defrosting Type | Manual |
| Type | Refrigerator |
| Total Capacity | 130 L |
To Next Page
