What to do if my Beko WI1483 does not drain water?
If your Beko Washing machine isn't draining water, the drain hose might be clogged or twisted, or the pump filter might be clogged. Clean or flatten the hose, and clean the pump filter.
Why is my Beko WI1483 not filling with water?
If your Beko Washing machine isn't filling with water, the tap might be off, the water inlet hose might be bent, the water inlet filter might be clogged, or the loading door might be open. Turn on the tap, flatten the hose, clean the filter, and close the door.
Why is my Beko WI1483 directly discharging the water it takes in?
If your Beko Washing machine is directly discharging water, the draining hose might not be at the correct height. Connect the water draining hose as described in the operation manual.
Why is there too much foam in my Beko Washing machine?
Too much foam in your Beko Washing machine is often due to using the wrong detergent, using too much detergent, improper detergent storage, the type of laundry (like tulle), or putting detergent in the wrong compartment. Also, the softener may be dispensing too early. Ensure you are using the correct detergent for washing machines, using only the recommended amount, storing it properly in a closed, dry location, and placing it in the correct compartment. If the issue persists, there may be a problem with the valves or detergent dispenser, and you may need to contact an authorized service agent.
Why is there detergent residue in the detergent drawer of my Beko Washing machine?
Detergent residue in the drawer of your Beko Washing machine can be caused by a wet drawer, damp detergent, low water pressure, blocked holes in the detergent compartment, or mixing detergent with softener. Also, there may be a problem with the detergent drawer valves or regular drum cleaning is not applied. Ensure the drawer is dry, store detergent properly, check water pressure, clear any blockages, and avoid mixing detergent with softener. If the problem persists, contact an authorized service agent.
Why is my laundry stiff after washing in my Beko WI1483? (**).
Stiff laundry after washing with your Beko Washing machine can result from using too little detergent for your water hardness, putting detergent in the wrong compartment, or mixing detergent with softener. Ensure you use enough detergent based on water hardness and avoid mixing detergent with softener. Also, make sure that you put the detergent in the correct compartment.
Why doesn't my laundry smell like softener after using my Beko WI1483? (**).
If your laundry doesn't smell like softener after using your Beko Washing machine, it might be because detergent was put in the wrong compartment or detergent might be mixed with the softener. Make sure to put the detergent in the correct compartment and avoid mixing it with the softener. Wash and clean the dispenser with hot water.
Why is my Beko WI1483 Washing machine vibrating or making noise?
Your Beko Washing machine might be vibrating or making noise because it's unbalanced, a hard substance has entered the pump filter, the transportation safety bolts haven't been removed, the laundry quantity is too little or too much, or the machine is leaning on something. Adjust the feet to level the machine, clean the pump filter, remove the transportation safety bolts, adjust the laundry quantity, and ensure the machine isn't leaning on anything.
General| Load Capacity | 8 kg |
|---|---|
| Spin Speed | 1400 rpm |
| Energy Efficiency Class | A+++ |
| Noise Level (Spin) | 76 dB |
| Number of Programs | 15 |
To Next Page
