Beko WKM6306W - User Manual

Need help?

Do you have a question about the Beko WKM6306W and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

This document is a user manual for the Beko Kettle models WKM6306W and WKM6306B.

Function Description

The Beko Kettle is an electric appliance designed for boiling water for household and similar applications. It features a spout for pouring, an internal water filter, a lid with a release button, a handle, a water level indicator, and an On/Off switch. The kettle operates on a base that houses a cable coil for storage.

Important Technical Specifications

Model Numbers: WKM6306W, WKM6306B
Power Supply: 220-240 V~, 50-60 Hz
Power: 2550-3000 W
Safety Features:
- Automatic shut-off when water boils.
- Can be manually stopped by pushing the On/Off switch upwards.
- Requires a grounded outlet for use.
- For additional protection, it is recommended to connect the appliance to a household faulty current protection switch with no more than 30 mA.
Plug Wiring (UK Specific):
- Incorporates a 13 A ASTA approved BS1362 fuse.
- Brown cable = L (Live)
- Blue cable = N (Neutral)
- Green/yellow cable = Ground (E)
- If using alternative plugs, a 13 A fuse must be fitted in the plug, adapter, or main fuse box.
Compliance:
- Complies with EU WEEE Directive (2012/19/EU) for waste electrical and electronic equipment.
- Complies with EU RoHS Directive (2011/65/EU), meaning it does not contain harmful and prohibited materials.
- Packaging materials are recyclable.

Usage Features

Preparation:
- Before first use, remove all packaging and stickers.
- Clean all parts that come into contact with water.
- Completely unroll the power cord from the cable coil on the base and pass it through the slot.
- Clean the kettle thoroughly before initial use and discard the water from the first two boiling cycles.
Operation:
- Open the lid by pressing the lid release button. The lid opens automatically.
- Fill the water tank with water. Do not place the water tank on the base while filling.
- Ensure the water level is between the minimum and maximum indicators. Never fill above maximum (boiling water may splash out) or below minimum.
- Close the lid until it clicks into place. The lid should always be closed during boiling for automatic shut-off.
- Place the water tank on the base, ensuring it is upright and stable.
- Insert the plug into a wall socket.
- Press down the On/Off switch to start boiling. The switch will illuminate.
- The kettle automatically switches off when water boils, and the On/Off switch moves upwards, turning off its indicator.
- To manually stop heating, push the On/Off switch upwards.
- After boiling, disconnect the plug and remove the water tank from the base, holding it by the handle.
- Do not open the lid while hot water is inside to avoid splashing.
- Allow the kettle to cool down between heating processes if repeating the boiling procedure.
Water Filter: The kettle is equipped with a water filter that removes limestone and other residues when pouring.
Water Quality: Using softened or filtered water is recommended to prevent lime build-up.

Maintenance Features

Cleaning and Care:
- Always turn off the appliance and disconnect it from the wall socket before cleaning.
- Allow the appliance to cool down completely.
- Clean the exterior with a damp soft cloth and a mild cleanser.
- Do not use petrol solvents, abrasive cleaners, metal objects, or hard brushes.
- Never immerse the appliance, base, or power cord in water or any other liquid.
- Water Filter Cleaning:
  - Press the release downwards to remove the filter.
  - Clean the filter with water and a little lemon juice or white vinegar, using a soft brush if needed, depending on lime build-up.
  - Insert the filter back until it clicks into place.
- After cleaning, dry all parts carefully with a soft towel before connecting to the mains supply.
Descaling:
- Descaling extends the life of the kettle; frequency depends on water hardness.
- Fill the heater to the maximum level with water and boil it.
- Unplug the appliance after it switches off.
- Add 2 cups of white vinegar or 1 tablespoon of citric acid to the boiled water.
- Let the solution sit in the heater for a few hours.
- Pour out the solution and thoroughly rinse the inner part of the heater.
- Fill the heater with clean water and boil it again.
- Empty the heater and rinse with water once more.
Storage:
- Ensure the appliance is unplugged, cooled, and completely dry before storing.
- Store in a cool, dry place, out of reach of children.
- Wind the power cord around the cable coil on the bottom of the base.
Handling and Transportation:
- Carry the appliance in its original packaging to protect against physical damage.
- Avoid placing heavy loads on the appliance or its packaging.
- Dropping the appliance can cause permanent damage or render it non-operational.