Why did the color of my clothes fade after washing in Beko WMB 71543W?
C
Christina BrownSep 10, 2025
If the color of your clothes faded after washing in your Beko Washer, it could be due to excessive laundry, damp detergent, or selecting a higher temperature. Do not load the product in excess. Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures. Select the proper programme and temperature according to the type and soiling degree of the laundry.
E
edwardmillerAug 22, 2025
What to do if Beko WMB 71543W loading door cannot be opened?
T
Timothy HarrisAug 23, 2025
If the loading door of your Beko Washer won't open, it could be due to a few reasons. The cover lock may be activated because of the water level inside the product; drain the water by running the Pump or Spin program. The product might be heating water or is at the spinning cycle; wait until the program completes. Alternatively, the child lock may be engaged; wait a couple of minutes for the door lock to deactivate after the program ends.
S
Samuel BrockAug 25, 2025
Why is my Beko Washer leaking from the bottom?
D
david43Aug 25, 2025
If you notice water leaking from the bottom of your Beko Washer, it could be due to a clogged or twisted water drain hose; clean or flatten the hose. Another possible cause is a clogged pump filter, so clean the pump filter.
E
Emily AcostaAug 26, 2025
Why is my Beko WMB 71543W Washer not taking water in?
P
Paul JonesAug 27, 2025
If your Beko Washer isn't taking in water, make sure the tap is turned on. Check if the water inlet hose is bent and flatten it if necessary. Also, the water inlet filter might be clogged, so clean the filter. Finally, ensure the loading door is completely closed.
M
Mary Montgomery MDAug 28, 2025
Why is my Beko Washer not switching to spinning step?
M
melissa54Aug 28, 2025
If your Beko Washer isn't switching to the spinning step, there might be an unbalanced load in the product, which activates the automatic unbalanced load detection system. The product also will not spin if water is not drained completely; check the filter and the draining hose. Excessive foam might have occurred, activating the automatic foam absorption system due to too much detergent usage; use the recommended amount of detergent.
D
Dawn ThomasAug 29, 2025
Why is my Beko WMB 71543W discharging water immediately?
C
Curtis RobinsonAug 29, 2025
If your Beko Washer is immediately discharging the water it takes in, the draining hose might not be at an adequate height. Connect the water draining hose as described in the operation manual.
M
Mark WeeksSep 18, 2025
Why is foam overflowing from the detergent drawer of my Beko WMB 71543W Washer?
F
flevineSep 18, 2025
If foam is overflowing from the detergent drawer of your Beko Washer, too much detergent may be used. Mix 1 tablespoonful of softener and ½ l of water and pour it into the main wash compartment of the detergent drawer. Also, put detergent into the product suitable for the programmes and maximum loads indicated in the manual. When you use additional chemicals (stain removers, bleaches, etc), reduce the amount of detergent.
J
Joanna SchwartzSep 12, 2025
Why do oily stains appeared on the laundry after washing in Beko Washer?
H
Holly AyalaSep 12, 2025
If oily stains appeared on the laundry after washing in your Beko Washer, regular drum cleaning may not be applied. Clean the drum regularly.
A
Andrew TrujilloSep 8, 2025
Why is there detergent residue in the detergent drawer of my Beko WMB 71543W Washer?
K
Kevin HoweSep 8, 2025
Detergent residue in the detergent drawer of your Beko Washer can occur for several reasons: the detergent is put in a wet drawer, the detergent has gotten damp, the water pressure is low, the holes of the detergent compartment are blocked, there is a problem with the detergent drawer valves, detergent might be mixed with the softener, or regular drum cleaning is not applied. Dry the detergent drawer before putting in detergent. Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures. Check the water pressure. Check the holes and clean if they are clogged. Do not mix the softener with detergent. Wash and clean the dispenser with hot water.
M
Mark MyersSep 5, 2025
Why is the washing performance of my Beko WMB 71543W Washer poor?
J
John ThompsonSep 5, 2025
Poor washing performance in your Beko Washer, such as stains persisting or laundry not whitening, can be due to several factors: insufficient detergent, excessive laundry, wrong programme and temperature settings, wrong type of detergent, or using an excessive amount of detergent. Use the recommended amount of detergent appropriate for water hardness and the laundry. Do not load the product in excess. Select the proper programme and temperature for the laundry to be washed. Use original detergent appropriate for the product. Put the detergent in the correct compartment. Do not mix the bleaching agent and the detergent with each other.