What to do if my Beko Washer doesn't fill with water?
If your Beko Washer isn't filling with water, start by ensuring the inlet water taps are fully open. Check the water inlet hose for any bends and straighten it if necessary. Also, the water inlet filter might be clogged, so clean it. Lastly, make sure the door is completely closed.
Why is my Beko WMC61W Washer leaking water from the bottom?
If you notice water coming from the bottom of your Beko Washer, the issue might be with the hoses or the pump filter. Ensure that the seals of the water inlet hoses are securely fitted. Also, tightly attach the drain hose to the waste pipe or sink. Finally, check that the pump filter is completely closed.
How to fix a Beko WMC61W Washer that won't drain water?
If your Beko Washer isn't discharging water, the water outlet hose might be clogged or twisted; in this case, you should clean or straighten the hose. Also, the pump filter may be clogged, so clean the pump filter.
Why didn't my Beko Washer spin?
If your Beko Washer didn't spin, it could be due to an imbalance of laundry in the machine, which may cause the program to complete without spinning. The automatic spin correction system might have been activated because the laundry is not evenly distributed in the drum. Rearrange and re-spin the laundry. Also, the machine will not spin if the water has not completely drained, so check the filter and the drain hose.
What to do if the program cannot be started on Beko Washer?
If the program cannot be started or selected on your Beko Washer, the machine may have switched to self-protection mode due to an infrastructure problem, such as line voltage or water pressure issues. Reset your machine by pressing the “Start/Pause/Cancel” button for 3 seconds.
Why doesn't my Beko WMC61W Washer rinse well?
If your Beko Washer isn't rinsing well, the issue could be related to the detergent. The amount, brand, and storage conditions of the detergent used might not be appropriate, so store detergent in a closed and dry place and avoid high temperatures. Also, detergent might have been put in the wrong compartment; if detergent is put in the prewash compartment although prewash cycle is not selected, the machine can take this detergent during rinsing or softener step. The machine filter may be clogged, so check the filter. The drain hose may be folded, so check the drain hose. Intermediate spins may be skipped if there is an imbalance of laundry in the machine; rearrange and re-spin the laundry.
How to stop my Beko WMC61W Washer from vibrating?
If your Beko Washer is vibrating or shaking, several factors could be the cause. First, make sure to adjust the machine feet to ensure it is level. Check that the transportation safety bolts have been removed. If there is only a small amount of laundry, add more to balance the load. For overloaded machines, reduce the amount of laundry or redistribute the clothes evenly by hand. Finally, ensure that the machine is not touching any solid surface.
Why is there so much foam in my Beko Washer?
Excessive foam in your Beko Washer can occur for several reasons. Ensure you are using detergent specifically designed for automatic washing machines. You might be using too much detergent, especially for a small load or lightly soiled items, so reduce the amount. Check that the detergent is stored properly in a closed, dry location, away from excessive heat. Also, make sure you're putting the detergent in the correct compartment; adding detergent to the prewash compartment when a prewash cycle isn't selected can cause issues.
Why does my Beko Washer take longer than the specified time?
Several factors can cause your Beko Washer to take longer than the specified time. Low water pressure will cause the machine to wait until a sufficient amount of water is available. Low supply voltage can also lengthen the washing time. If the input water temperature is low, the cycle time will increase to heat the water. An imbalance of laundry can activate the automatic spin correction system. Finally, the number of rinses or the amount of rinse water may have increased to improve rinsing.
What to do if my Beko WMC61W isn't cleaning stains properly?
If your Beko Washer isn't removing stains effectively, make sure you are using the recommended amount of detergent appropriate for the laundry load. Avoid overloading the machine. Ensure you've selected the correct program and temperature for the type of laundry you're washing. Also, verify you're using the right type of detergent and placing it in the correct compartment, avoiding mixing detergent with bleaching agents.
Provides a general understanding of the washing machine's components and layout.
Details technical specifications of the WMC62W and WMC61W models.
Covers essential safety precautions, first use guidance, and the appliance's intended domestic use.
Addresses safety regarding children and crucial electrical connection requirements.
Instructions for removing packaging, transportation locks, selecting location, and adjusting feet.
Details on connecting the water supply and drain hoses securely and correctly.
Guides proper electrical connection, plug fitting, and safe disposal of materials.
Guidance on sorting laundry and preparing items like pockets and fasteners for washing.
Covers proper door loading, detergent drawer usage, and selecting/using cleaning agents and softeners.
Explains the control panel layout and the function of each button and indicator.
Guides on turning on the machine and selecting wash programs based on laundry type.
Covers adjusting spin speed and selecting specialized wash cycles.
Presents a table detailing programs, load capacity, duration, and consumption figures.
Explains additional wash functions, program start, and mid-cycle operations.
Details how to change programs, adjust settings, and add/remove laundry mid-cycle.
Covers child-proof lock, program cancellation, and end-of-cycle indicators.
Guides through preparation, starting, canceling, adding laundry, and managing rinse hold states.
Details steps after program completion, including re-spinning and shutting down the machine.
Details cleaning procedures for the detergent drawer, door, drum, cabinet, panel, and inlet filters.
Explains how to drain residual water and clean the pump filter for optimal machine function.
Addresses problems with starting programs, water presence, filling, and discharging.
Resolves issues like machine stopping, water discharge problems, vibration, and extended washing times.
Diagnoses issues with spinning, timer countdowns, gray laundry, stains, and odors.
Troubleshoots stain removal, whitening, bad odors, faded colors, and poor rinsing.
Troubleshoots stiff clothes, lack of softener scent, detergent residue, and detergent left on laundry.
Addresses excessive foam, machine not powering on, start issues, flashing lights, and lid indicators.
Details the terms, coverage, exclusions, and important notes regarding the product warranty.
Provides contact information and procedures for obtaining service and support for the washing machine.
To Next Page
General
