What to do if my Beko Washer does not fill with water?
If your Beko Washer isn't filling with water, first, ensure that the tap is fully open and the water inlet hose isn't bent. Check if the water inlet filter is clogged and clean it if necessary. Lastly, make sure the loading door is completely closed.
How to fix a Beko Washer that does not discharge water?
If your Beko Washer isn't discharging water, the water outlet hose might be clogged or twisted, or the pump filter may be clogged. Clean or flatten the hose and clean the pump filter to resolve this issue.
Why is there water coming from the bottom of my Beko WML 15065 J?
If there's water coming from the bottom of your Beko Washer, check the water inlet hoses to ensure the seals are securely fitted. Tightly attach the drain hose to the tap and make sure the pump filter is completely closed.
How to reset my Beko Washer when the program won't start?
If your Beko Washer programme cannot be started or selected, the machine may have switched to self-protection mode due to an infrastructure problem such as line voltage or water pressure issues. To bring your machine to factory settings, turn the program selection knob.
Why does my Beko WML 15065 J Washer stop shortly after starting?
If your Beko Washer stops shortly after the program starts, it might be due to low voltage. The machine will resume operating when the voltage returns to the normal level.
Why my Beko Washer does not work and no light is on?
If your Beko Washer does not work and no light is on, check if the plug is properly inserted into the mains outlet, inspect the fuse, and ensure that there is no electricity cut off. Also, verify that the “On/Off” button has been pressed.
Why is water immediately discharged from my Beko WML 15065 J?
If the water being taken into your Beko Washer is directly discharged, it's likely due to improper positioning of the drain hose. Connect the water draining hose as described in the operation manual.
Why is my Beko WML 15065 J vibrating so much?
If your Beko Washer vibrates or shakes, make sure the machine feet are properly adjusted and the transportation safety bolts have been removed. Also, check if the load is balanced; add more laundry if there's only a small amount, or redistribute it manually if overloaded. Ensure that the machine isn't touching any solid surface.
What to do if my Beko WML 15065 J Washer spins continuously?
If your Beko Washer is continuously spinning and the remaining time isn't counting down, it may be due to an imbalance of laundry in the machine. The automatic spin correction system might have been activated. Try rearranging the laundry and re-spinning it. No spinning is performed when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its environment.
General| Water consumption per cycle | 0 L |
|---|---|
| Energy consumption washing per cycle | 0 kWh |
| Loading type | Front-load |
| Product color | White |
| Appliance placement | Freestanding |
| Washing class | A |
| Drum capacity | 0 kg |
| Maximum spin speed | 600 RPM |
| Number of washing programs | 8 |
Weight and Dimensions| Depth | 450 mm |
|---|---|
| Width | 600 mm |
| Height | 840 mm |
Provides a visual overview of the washing machine components.
Details technical specifications for different models.
Outlines crucial safety precautions for machine operation.
Instructions for initial setup and first operation of the machine.
Defines the proper and intended use of the appliance.
Lists detailed safety guidelines and warnings.
Specific safety advice for households with children.
Steps to remove shipping protection from the machine.
Instructions on removing transit bolts for safe operation.
Guidance on selecting a suitable and stable place for installation.
How to level and stabilize the washing machine using its feet.
Details how to connect the machine to the water source.
Instructions for correctly connecting the drain hose.
How to safely connect the washing machine to the electrical supply.
Guidance on safely disposing of packaging materials.
Instructions for environmentally friendly disposal of the old appliance.
Guidance on separating laundry by fabric type, color, and soiling.
Steps to prepare clothes, like emptying pockets and fixing items.
Information on the maximum load and how it affects washing.
Instructions on how to open and close the washing machine door.
Explains how to use detergent and softener compartments.
Details the compartments within the detergent dispenser.
How to add detergent, softener, and other agents.
Guidance on selecting the right detergent for different fabrics.
Advice on using the correct amount of detergent.
Explains the layout and function of the machine's control panel.
Steps to power on the washing machine.
How to choose the appropriate wash program.
Details the primary wash programs like Cottons, Synthetics, Woollens.
Describes special programs like Delicate, Hand wash, Mini 30.
Programs for specific tasks like rinsing or draining.
How to adjust the spin speed for different laundry types.
Table detailing programs, load, duration, and consumption.
Explains additional functions available for wash cycles.
Step-by-step guide to start a selected wash program.
How to understand the program's progress through indicators.
How to modify program settings mid-cycle.
Adjusting functions, temperature, or spin speed during operation.
How to add or remove clothes while the cycle is paused.
How to activate and deactivate the child lock feature.
Procedures for canceling an ongoing wash program.
What happens and what indicators are shown when the program finishes.
Steps to prepare the machine before starting a wash.
Basic steps to start a wash program.
How to stop or cancel a running program.
How to add clothes during a wash cycle.
Explanation of the rinse hold function.
How to perform an additional spin cycle.
Actions to take after the washing program has concluded.
Instructions for cleaning the detergent dispenser.
How to clean the washing machine's door and drum.
Cleaning the exterior panels and control interface.
How to clean the filters that prevent debris from entering.
Steps for draining water and cleaning the pump filter.
Solutions for issues with starting or selecting programs.
Explanation for water present upon receipt.
Troubleshooting water leaks from the machine base.
Reasons and solutions for the machine not taking in water.
Troubleshooting when the machine fails to drain water.
Causes and fixes for excessive vibration or shaking.
Solutions for the machine stopping unexpectedly.
Diagnosing issues with continuous water discharge.
What to do if the washing machine door is stuck.
Explains water behavior when a process is cancelled.
Note that the interior can be hot during operation.
Troubleshooting spinning issues and time display.
Addressing issues caused by uneven laundry distribution.
Reasons for extended washing cycles.
Troubleshooting washing time and countdown display issues.
Solutions when the machine fails to spin.
How to fix laundry turning grey.
Addressing issues with stain removal and whitening.
Solutions for oily stains on laundry.
How to prevent or remove bad odors from laundry or machine.
Causes and solutions for clothes fading.
Troubleshooting issues with the rinsing process.
Causes and solutions for stiff laundry.
Addressing issues where softener scent is not noticeable.
Solutions for detergent buildup in the dispenser.
Causes and fixes for detergent remaining on clothes.
Troubleshooting excessive foam generation.
Addressing issues with premature softener release.
Solutions for foam overflowing the detergent drawer.
Troubleshooting when the machine shows no signs of power.
Solutions when the program fails to initiate after selection.
Diagnosing flashing indicator lights during operation.
Understanding the meaning of a flashing lid indicator.
To Next Page
