Bel 80 Series - User Manual

Bel Stewart Connector
Page
1
of
2
MN800006
-
A
1
11118 Susquehanna Trail South Glen Rock, PA 17327
80 SERIES UNSHIELDED CABLEJACK
ASSEMBLY INSTRUCTIONS
80 SERIES CABLEJACK ASSEMBLY INSTRUCTIONS
This product may be protected by one or more of the following US Patents.
5639266, 5791942, 6217391, 6368159, 6419526, 6602097,
6877222, 6964587, 7048590, 7086909, 7568950, 7686650
Assembly steps 1
–
11:
This document shows the assembly of a 10 position jack. Wire order and color may vary with application
Trim lower row conductors @
< 45

angle
4
Place lower row conductors into
load bar
5
Trim lower row flush with front
of load bar
6
Spread apart wires, untwist
pairs if necessary
2
Align lower row conductors, fold
upper conductors out of way
3
1
Strip off approximately 1 ¼ inch
of cab
le jacket

Bel 80 Series Specifications

General

Brand	Bel
Model	80 Series
Category	Cables and connectors
Language	English