Belair 3000 User Manual

Belair 3000
Operating instructions (E)
Congratulations on your purchase!
Belair is a product that provides for effective removal of odours in
toilet rooms. It upholds the highest standards of comfort,
functionality, quality, design and energy efficiency.
Belair is a toilet seat with an integrated filter that quickly and
efficiently eliminates unpleasant gases before they become dispersed
into the surrounding environment.
Adjustable screws allow for simple assembly and disassembly of the
device on most toilet bowls.
The device requires less than a tenth of the energy of conventional
bathroom ventilation systems and saves on the loss of heating energy
during cold periods of the year.
Please carefully read through the operating instructions in their
entirety before putting the device into operation.
Note!
- Prior to operation, please check to make sure your voltage system
corresponds to the voltage indicated for the device (220-230 volts).
- Never clean the device when the filter housing is open.
- Make sure that no water or other fluid enters the air intake slots. Any
fluid inside the device could cause permanent damage.
- Children or individuals with limited physical, sensory or mental
capacities should only employ this product after a thorough
explanation of how to use devices connected to electric power.

Belair 3000 Specifications

General

Brand	Belair
Model	3000
Category	Plumbing Product
Language	English

Summary

Assembly Instructions

Install Toilet Seat

Mount the Belair 3000 toilet seat onto the toilet bowl using provided screws and nuts.

Sensor Contact Adjustment

Ensure the underside sensor touches the toilet bowl rim when the seat is lowered for proper function.

Power Connection and Cable Management

Connect the device to power and secure the cable safely along the wall, avoiding floor placement.

Product Utilization and Warnings

Automatic Ventilation Activation

The ventilation function is activated by a sensor on the underside when the user sits on the seat.

Seat Handling Warning

Avoid dropping the seat onto the toilet bowl repeatedly to prevent potential damage to the device.

Cleaning and Filter Maintenance

Cleaning Instructions

Clean the toilet seat with standard cleaners and a non-abrasive cloth; avoid wet sponges or brushes.

Filter Replacement

Replace the filter annually or when effectiveness decreases by pressing snap-fit closures on the housing.

Troubleshooting Guide

Device Not Switching On

Check adapter connection, outlet fuses, or reposition the seat to ensure sensor contact.

Odour Elimination Issues

Verify filter presence, replace if used up (approx. 1 year) or wet, and check sensor contact.

Detached Seat Lid

Reattach the lid by placing it back onto the two nubs on the sides of the seat.

Warranty and Technical Information

Manufacturer's Warranty

One-year warranty covers material/manufacturing defects; excludes improper use and normal wear.

Technical Specifications

Device operates on 220-230 Volts and consumes 2.8 Watts.