THE SCIENCE
BEHIND HEAT
Instructions for Use
Before First Use
Before using the steam mop for the first time, ensure that it is switched off and unplugged from
the mains power supply.
Clean the exterior surface of the steam mop with a soft, damp cloth and dry thoroughly.
Assembling the Steam Mop
STEP 1: Insert the handle with extension tube into the pivot hinge at the
tapered end (figure 1).
STEP 2: Insert the lower extension tube (with the lower cord storage clip) into the assembled
handle and pivot hinge section (figure 2).
STEP 3: Insert the assembled handle section into the steam mop main body (figure 3).
BEL0196 Steam Mop with Back Saving Function
7
Figure 1 Figure 2 Figure 3
To Next Page
Loading...
