Instructions for Use
Before First Use
Before using the vacuum cleaner for the first time, clean it with a soft, damp cloth and
dry thoroughly. Do not immerse the vacuum cleaner in water or any other liquid.
Assembling the Compact Vac Lite
Switch off and unplug the vacuum cleaner from the mains power supply before fitting
any accessories onto the air inlet.
STEP 1: Fit the dust container by pushing it into the main vacuum cleaner unit, aligning
the latch with the indent on the unit.
STEP 2: To attach the suction hose, pinch the suction hose lock and insert it into the air
inlet, ensuring that it locks into position.
Using the Telescopic Extension Tube
The floor brush and brush/crevice tool both fit onto the telescopic extension tube to
help reach into confined spaces, such as behind radiators or underneath car seats.
STEP 1: Fit the telescopic extension tube by pushing the large opening of the telescopic
extension tube over the end of the suction hose neck (1).
STEP 2: Push the chosen attachment onto the end of the telescopic extension tube (2).
STEP 3: Adjust the telescopic extension tube to the required length by pressing the
telescopic extension tube button down and sliding the inner tube in or out.
STEP 4: Release the telescopic extension tube button to lock the telescopic extension
tube into position at the selected length.
To Next Page
Loading...