EasyManua.ls Logo

Beldray EH2658SSTK - Connection to the Mains; Important Plug Information; Non-Rewireable Plug Fuse Replacement

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Connection to the mains
Please check that the voltage indicated on the product corresponds with your
supply voltage.
Important
As the colours in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, please proceed as follows:
The wires in the mains lead are coloured in
accordance with the following code:
Blue Neutral (N)
Brown Live (L)
FOR UK USE ONLY - Plug tting details
(where applicable).
The wire coloured BLUE is the NEUTRAL and
must be connected to the terminal marked N or coloured BLACK.
The wire coloured BROWN is the LIVE wire and must be connected to the terminal
marked L or coloured RED.
On no account must either the BROWN or the BLUE wire be connected to the
EARTH terminal (
).
Always ensure that the cord grip is fastened correctly.
The plug must be tted with a fuse of the same rating already tted and conforming to
BS 1362 and be ASTA approved.
If in doubt consult a qualied electrician who will be pleased to do this for you.
Non-rewireable mains plug
If your appliance is supplied with a non-rewireable plug tted to the mains lead and
should the fuse need replacing, you must use an ASTA approved one (conforming to
BS 1362 of the same rating).
If in doubt, consult a qualied electrician who will be pleased to do this for you.
If you need to remove the plug - DISCONNECT IT FROM THE MAINS and then cut it off
the mains lead and immediately dispose of it safely. Never attempt to reuse the plug or
insert it into a socket outlet as there is a danger of an electric shock.