Need help?Do you have a question about the Belkin AC Anywhere F5C400u140W and is the answer not in the manual?
Manual provides directions for safe operation; 230V output can be lethal.
Determine equipment power consumption and calculate start-up load before use.
Inverter provides brief surge power but is rated for continuous wattage.
Power source must provide 12V DC and sufficient current for the load.
Steps to connect the Inverter to a 12V battery via the cigarette lighter socket.
Explains fuses, common causes for blowing, and replacement procedure.
Battery life depends on age, condition, and load; start engine periodically.
Inverters may require the vehicle's ignition to be in the accessory position.
Green LED indicates normal status; Red indicates overload or low battery.
Inverter shuts down if battery voltage is too low/high or draw is excessive.
Auto shutdown for high temp; audible alarms for low voltage/high temp.
Keep dry, operate within temperature range, and ensure adequate ventilation.
For loads >150W on 300W models, use direct-connect cables to prevent damage.
Steps to connect the 300W Inverter directly to a 12V battery using cables.
Details on continuous power, surge capability, voltage, current draw, and physical dimensions.
Covers power ratings, voltage ranges, fuses, waveform, and physical characteristics.
Indicates the product's safety classification as Class II.
Solutions for issues like high start-up surge, low battery voltage, and overheating.
Addresses blown fuses, poor battery condition, and inadequate power delivery.
Warnings regarding improper use, potential hazards, inductive loads, and keeping away from children.
To Next Page
General