5
TROUBLESHOOTING
When using Conserve Socket, my device
does not fully charge.
Make sure you have selected an appropriate
time period for the device you are trying to
charge by referring to step 3 of the Quick
Setup Guide, or simply increase the time
period selected on the Conserve Socket.
When I press the start button a second
time, the unit does not turn off.
The Conserve Socket cannot be manually
turned off; you should wait for the countdown
timer to finish, which will turn off the device.
You can also turn off (reset) your Conserve
Socket by unplugging it from the wall outlet.
Limited One (1) Year Warranty
What this warranty covers.
Belkin International, Inc., warrants to the original purchaser of this
Belkin Conserve Socket, that the Conserve Socket shall be free of
defects in design, assembly, material, or workmanship.
What the period of coverage is.
Belkin International, Inc., warrants the Belkin Conserve Socket for
one (1) year from the original date of purchase.
What will we do to correct problems?
Conserve Socket Warranty. Belkin will repair or replace, at its
option, any defective Conserve Socket free of charge (except
for shipping charges for the Conserve Socket). Belkin reserves
the right to discontinue any of its products without notice, and
disclaims any limited warranty to repair or replace any such
discontinued products. In the event that Belkin is unable to repair
or replace the Conserve Socket (for example, because it has
been discontinued), Belkin will offer either a refund or a credit
toward the purchase of another product from Belkin.com in an
amount equal to the purchase price of the Conserve Socket as
evidenced on the original purchase receipt and as discounted by
its natural use.
What is not covered by this warranty?
All above warranties are null and void if the Belkin Conserve
Socket is not provided to Belkin International, Inc., for inspection
upon Belkin’s request at the sole expense of the purchaser, or
if Belkin International, Inc., determines that the Belkin Conserve
Socket has been improperly installed, altered in any way, or
tampered with. The Belkin Conserve Socket Warranty does not
protect against acts of God (including but not limited to flood,
earthquake, war, and vandalism), theft, normal-use wear and tear,
erosion, depletion, obsolescence, abuse, or alteration.
How to get service.
To get service for your Belkin Conserve Socket, you must take the
following steps:
Specifications
.
Continuous Duty Electrical Rating: 120V~/15A/60Hz/1800W
.
Operating Power Consumption: 0.18W
Safety Information
.
Important: Use indoors in a dry location.
.
Contains not-user-serviceable parts; do not open.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one of the
following measures:
.
Reorient or relocate the receiving antenna.
.
Increase the separation between the equipment and receiver.
.
Connect the equipment into an outlet on a circuit different from
that which the receiver is connected.
.
Consult the dealer or an experienced radio/TV technician
for help.
Belkin International, Inc., is not responsible for any interference
caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate this
equipment.
To Next Page
Loading...
