EasyManua.ls Logo

Belkin F1DN102KVM-UN-3 - Page 27

Belkin F1DN102KVM-UN-3
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
Belkin
®
Secure Ultra High Def DP/HDMI to DP/HDMI KVM Switch
SECTIONS
Table of Contents
1 2 3 4 5 6 7
TROUBLESHOOTING
6
Keyboard
The computer does not detect my keyboard, or my keyboard does
not work when I switch computers or reboot.
Check that the keyboard you are using is connected properly to
the Switch, in the USB port labeled “Keyboard.”
Check that the USB cable between the Switch and the computer
is completely connected.
Try connecting to a different USB port on the computer.
Make sure the keyboard works when directly plugged into the
computer (the HID USB driver is installed on the computer).
Rebooting may be necessary when trying this.
Make sure you are not using a keyboard with an integrated USB
hub or other USB-integrated devices.
If the computer is coming out of standby mode, allow up to one
minute to regain mouse function.
Try a different keyboard.
Do not use a USB extension cable.
The CAPS, NUM, and Scroll Lock lights on my keyboard do
not function when I connect to the Belkin Advanced Secure
DisplayPort KVM.
This is normal operation. The lock-state information is fully functional.
Due to the security of the Belkin Advanced Secure DisplayPort KVM and
known exploitation of lock-state information for leakages, the LED status
is not supported. Please refer to the operating system for verification of
the lock-state information for CAPS, NUM, and Scroll Lock.
Mouse
The computer does not detect my mouse, or my mouse does not
work when I switch computers or reboot.
Check that the mouse you are using is connected properly to the
Switch in the USB port labeled “Mouse.
Check that the USB cable between the Switch and the computer
is completely connected.
Try connecting to a different USB port on the computer.
Make sure the mouse works when directly plugged into the
computer (the HID USB driver is installed on the computer).
Rebooting may be necessary when trying this.
If the computer is coming out of standby mode, allow up to one
minute to regain mouse function.
Try a different mouse.

Related product manuals