14
Belkin
®
Secure DVI-I KVM Switch with Audio User Manual
INSTALLATION
SECTIONS
Table of Contents
1 2 4 5 6 873
Pre-Configuration
Where to place the Switch:
The enclosure of the Switch is designed for desktop or under-mount
configuration. An optional Mount Kit (Belkin part number F1D006) is
available.
Consider the following when deciding where to place the Switch:
• your proximity to the port selectors on the front of the Switch
• the lengths of the cables attached to your keyboard, monitor, and
mouse
• the location of your computers in relation to your console
• the lengths of the cables you use to connect your computers to
the Switch
Warning: Avoid placing cables near fluorescent lights, air-
conditioning equipment, or machines that create electrical noise
(e.g., vacuum cleaners).
Important:
1. If the unit’s enclosure appears disrupted or if all channel-
select LEDs flash continuously, please remove product from
service immediately and contact Belkin Technical Support
at (800) 282-2355.
2. Do not connect product to computing devices:
a. That include telecommunication equipment;
b. That include frame grabber video cards;
c. That include special audio processing cards.
To Next Page
Loading...
