Belkin F1DN104G User Manual

Belkin® Advanced 4-port Secure DVI-I
KVM Switch with DCU User Manual
User Manual
F1DN104G--Advanced Secure 4-Port Single-Head DVI-I KVM with DCU
F1DN104H--Advanced Secure 4 -Port Dual-Head DVI-I KVM with DCU
Document Number 8820-00779 Rev. A00

Belkin F1DN104G Specifications

General

Product Type	KVM Switch
Ports	4 x KVM port(s)
Number of Users Supported	1
MAC Address Table	Unknown
Packet Buffer Memory	Unknown
Switching Capacity	Unknown
Forwarding Rate	Unknown

Summary

Introduction

Important Security Notes

Important security warnings and contact information for vulnerabilities.

Safety Precautions

Installation

Connection and Installation

Step-by-step instructions for connecting the console and powering up the switch.

Connecting Computers

Instructions for connecting computers to the KVM switch using cable kits.

Powering Up Computers

Steps for powering on connected computers and verifying functionality.

Operating the KVM Switch

Selecting a Computer

How to switch between connected computers using port selectors and LEDs.

Common Access Card (CAC) Configuration and Operation

CAC Installation

Troubleshooting

General Issues

Addresses common problems like computers not booting or the switch not powering on.

Video Issues

Solutions for ghosting, shadowing, or fuzzy video display problems.

Blank Screen Issues

Troubleshooting steps for when the monitor displays a blank screen.

Keyboard Issues

Solutions for keyboard detection and functionality problems.

Mouse Issues

Troubleshooting steps for mouse detection and functionality problems.

CAC Reader Functionality