Belkin F6C1000-EUR, F6C700-EUR, F6C1400-EUR User Manual

Fr
De
UPS
Uninterruptible Power Supply
Onduleur
Dispositif d'alimentation sans coupure
USV
Unterbrechungsfreie Stromversorgung
FOR MODELS:
F6C700-EUR/F6C1000-EUR/F6C1400-EUR
POUR LES MODELES :
F6C700-EUR/F6C1000-EUR/F6C1400-EUR
FÜR DIE MODELLE
F6C700-EUR/F6C1000-EUR/F6C1400-EUR
User Manual
Manuel de l'utilisateur
Benutzerhandbuch
UK
P73335
En
P73335u_UPS_man.qxd 4/30/01 12:19 PM Page 1

Belkin F6C1000-EUR, F6C700-EUR, F6C1400-EUR Specifications

General

Brand	Belkin
Model	F6C1000-EUR, F6C700-EUR, F6C1400-EUR
Category	UPS
Language	English

Summary

Introduction and Overview

2-1 Symbols Explained

Defines various symbols used in the manual for clarity.

2-2 Theory of Operation

Explains how the line-interactive UPS works, including modes.

2-3 Key Features

Details the intelligent features of the UPS, like communication and user interface.

2-5 Front Panel Controls and Indicators

Describes the indicators and buttons on the front of the UPS.

2-6 Rear Panel Ports and Connectors

Identifies all ports and connectors on the rear of the UPS.

Installation Guide

3-1 Unpacking Procedures

Steps for safely unpacking the UPS unit and checking for damage.

3-2 Pre-Installation Checks

Precautions and environmental considerations before installing the UPS.

3-3 Connecting to Power

Instructions for connecting the UPS to utility power and computer.

UPS Operation and Indicators

4-1 Cold Start Procedure

How to turn on the UPS when utility power is absent.

4-2 Turning the UPS ON

Procedure for turning on the UPS under normal utility power.

4-3 Turning the UPS OFF

How to turn off the UPS and important notes.

4-4 UPS Self-Test Function

How to perform an automatic self-test on the UPS.

4-5 Buzzer Silence Function

How to toggle the buzzer on/off during battery mode.

4-6 Load Level Display Explained

Explanation of the 4-LED load percentage display.

4-7 Battery Level Display Explained

Description of the battery capacity LED indicators.

4-8 Abnormal Conditions and Messages

UPS messages for abnormal conditions like ON BATTERY MODE.

Overload Condition Handling

What happens and what to do during an overload condition.

Buck/Boost Voltage Regulation

How the UPS adjusts voltage for high or low utility power.

Battery Replacement Alert

Indicates when the UPS battery needs replacement.

Battery Low Warning Indicator

Alert for low battery capacity and its implications.

Short Circuit Handling Procedure

UPS response to a short circuit condition.

Over Temperature Warning System

Action taken by UPS when internal temperature is too high.

UPS Fault Detection and Response

What happens when the UPS detects an internal fault.

Maintenance Recommendations

Battery Replacement Guide

EcoBattery Replacement Program

Belkin's program for environmentally sound battery disposal.

6-1 Safety Notices for Battery Replacement

Important safety notices before replacing batteries.

6-2 Step-by-Step Battery Replacement

Step-by-step guide for replacing the UPS battery.

Troubleshooting Common Issues

Communication Interface Options

8-1 RS-232 Protocol Details

Details of the RS-232 communication protocol and pinout.

RS-232 Hardware and Cabling

RS-232 hardware specs and computer-UPS cabling.

8-2 Dry Contact Protocol Details

Details of the Dry Contact communication protocol and pinout.

Technical Specifications

Battery and Communication Specs

Battery capacity, recharge time, and communication interface details.

Mechanical and Physical Specifications

Dimensions, weight, operating conditions, safety, and EMI/RFI.

Appendix A: Typical Run Time Charts

Compliance and Warranty Information

FCC Statement and Compliance

Declaration of conformity with FCC rules for electromagnetic compatibility.

CE Declaration of Conformity

Declaration of conformity with CE standards.

Limited Lifetime Product Warranty

Details of Belkin's limited lifetime product warranty.

Belkin Company Contact Details